COMPATIBILITY
CircuitWorks
Silver Conductive Grease is
generally compatible with metal, rubber,
and plastic. As with any compound,
compatibility with substrate should be
determined on a non-critical area prior to
use.
USAGE INSTRUCTIONS
Surface Preparation: For best results,
clean parts to be lubricated with
Chemtronics
Electro-Wash
PX cleaner in
order to remove any surface contamination
which may prevent adequate material
contact.
Thinning: Do not attempt to thin.
Application:
Syringe: Remove cap and gently press on
plunger. Apply CircuitWorks
Silver
Conductive Grease directly to surface or use
application tip.
Clean-Up: Electro-Wash
PX cleaner can
be used to remove trace residues. Excess
material may also be removed using a wipe
such as the Chemtronics
ControlWipes.
Silver particles may stain porous materials.
WARNING:
To avoid shock or possible fire, stop power to
any system before applying conductive grease.
Insure positive and negative contacts remain
isolated. Improper use can result in shorting,
arcing, or shock.
AVAILABILITY
CW7100 6.5g / 0.23 oz. Syringe
CW7100KG 1 kg container
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is: 1-800-TECH-401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
Chemtronics, Electro-Wash and CircuitWorks are
registered trademarks of Chemtronics. All rights reserved.
ControlWipes is a trademark of Chemtronics. All rights
reserved.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. J (02/17)
