HLMP-C025 Datasheet HLMP-C025 | P1-P3

HLMP-Cx08 Series, HLMP-Cx25 Series

HLMP-Cx27 Series, HLMP-C610

T-1

(5 mm) AlInGaP Lamps

Data Sheet

Features

• High intensity

• General purpose leads

• Popular 5 mm diameter

• Available in bulk, tape and reel, or ammopack

• 8° or 25° viewing angles

• Choice of colors: Amber or Red

Applications

• Indoor/outdoor applications

• Small store-front signs

• Message panels

• Road construction barrier lights

• Center high mount stop lights

• Spoiler, car decorative lighting

• Motorcycle/bicycle warning lights

Description

The HLMP-Cx08, HLMP-Cx25, HLMP-Cx27, and HLMP-C610

series are 5 mm lamps specially designed for applications

requir-ing very high on-axis intensity that is not achiev-

able with a standard lamp. These devices are capable

of producing light output over a wide range of drive

currents.

Built using AlInGaP technology, they are well suited for

typical 5 mm TS-AlGaAs lamp applica-tions, and have

signiﬁcantly SUPERIOR RELIABILITY than most TS-AlGaAs

lamps in wet/hot environments. These lamps come with

clear non-diﬀused lens and are optically designed to yield

superior light output.

Device Selection

Part Number Standoﬀ

Typical Viewing

Angle

[1]

(degrees),

1/2

Luminous Intensity,

Iv (mcd) @ 20 mA

Color

Dominant

Wavelength

[2]

Min. Typ.

HLMP-C008-U00xx No 8 2900 6000 Red 626

HLMP-C208-S00xx 8 2600 3000 Amber 590

HLMP-C608-R00xx 8 1000 2000 Red 635

HLMP-C610-R00xx Yes 8 1000 2000 Red 635

HLMP-C025-P00xx No 25 500 1000 Red 626

HLMP-C225-O00xx 25 450 800 Amber 590

HLMP-C625-P00xx 25 500 700 Red 635

HLMP-C027-P00xx Yes 25 500 1000 Red 626

HLMP-C627-P00xx 25 500 700 Red 635

HLMP-C325-P00xx No 25 500 Orange 605

Notes:

1. q

is the oﬀ-axis angle at which the luminous intensity is half of the axial luminous intensity.

2. The dominant wavelength, l

, is derived from the CIE chromaticity diagram and represents the single wavelength which deﬁnes the color of the

device.

Package Dimensions

HLMP-Cx27

6.10 (0.240)

5.46 (0.215)

1.27

(0.050)

NOM.

2.54

(0.100)

0.45

(0.018)

SQ. NOM.

CATHODE

LEAD

25.40

(1.00)

MIN.

NOM.

5.08 (0.200)

4.57 (0.100)

13.55 (0.533)

13.35 (0.525)

0.89 (0.035)

0.64 (0.023)

9.19 (0.362)

8.43 (0.332)

1.32 (0.052)

1.02 (0.040)

6.10 (0.240)

5.46 (0.215)

1.27

(0.050)

NOM.

2.54

(0.100)

0.45

(0.018)

SQ. NOM.

CATHODE

LEAD

25.40

(1.00)

MIN.

NOM.

5.08 (0.200)

4.57 (0.100)

0.89 (0.035)

0.64 (0.023)

9.19 (0.362)

8.43 (0.332)

1.02 (0.004)

MAX. TYP.

1.00 (0.040) MAX. EPOXY MENISCUS

HLMP-Cx25

HLMP-C610

HLMP-Cx08

6.10 (0.240)

5.46 (0.215)

1.27

(0.050)

NOM.

2.54

(0.100)

0.45

(0.018)

SQ. NOM.

CATHODE

LEAD

25.40

(1.000)

MIN.

NOM.

5.21 (0.205)

4.70 (0.105)

13.50 (0.53)

13.30 (0.52)

1.07 (0.042)

0.56 (0.022)

9.14 (0.360)

8.36 (0.330)

1.32 (0.052)

1.02 (0.040)

6.10 (0.240)

5.46 (0.215)

1.27

(0.050)

NOM.

2.54

(0.100)

0.45

(0.018)

SQ. NOM.

CATHODE

LEAD

25.40

(1.000)

MIN.

NOM.

5.21 (0.205)

4.70 (0.105)

1.07 (0.042)

0.56 (0.022)

9.14 (0.360)

8.36 (0.330)

1.02 (0.004)

MAX. TYP.

1.00 (0.040) MAX. EPOXY MENISCUS

Part Numbering System

HLMP - C x xx - x x x xx

Mechanical Option

00:Bulk

02: Tape & Reel, Straight Leads

DD: Ammo Pack

Color Bin Options

0: Full Color Bin Distribution

Maximum Iv Bin Options

0: Open (no max. limit)

Minimum Iv Bin Options

Please refer to the Iv Bin Table

Viewing Angle & Standoﬀ Option

08: 8 degrees, without standoﬀ

10: 8 degrees, with standoﬀ

25: 25 degrees, without standoﬀ

27: 25 degrees, with standoﬀ

Color Options

0: AlInGaP Red 626 nm

2: AlInGaP Amber 590 nm

3: AlInGaP Orange 605 nm

6: AlInGaP Red 635 nm

Absolute Maximum Ratings at T

= 25°C

Parameter Absolute Maximum Units

Peak Forward Current 70 mA

Average Forward Current

[1]

30 mA

DC Current

[2]

50 mA

Reverse Voltage (I

= 100 μA)

5 V

LED Junction Temperature

110 °C

Operating Temperature Range -40 to +100 °C

Storage Temperature Range -40 to +100 °C

Notes:

See Figure 2 to establish pulsed operating conditions.

2. Derate linearly from 50°C at 0.5 mA/°C.

3. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and

wirebond. It is not recommended that this device be operated at peak currents above the Absolute Maximum Peak Forward Current.

P1-P3 P4-P6 P7-P9

HLMP-C025

Mfr. #:

Buy HLMP-C025

Manufacturer:

Broadcom / Avago

Description:

Standard LEDs - Through Hole Red Water Clear 626nm 1000mcd

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

HLMP-C025