SpecNo.JELF243A-9138-01 P.9/14
MURATA MFG.CO., LTD
Reference
Only
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
17 ESD Per AEC-Q200-002 ESD Rank: Refer to Item 3. Rating.
Meet Table A after testing
18 Solderbility Per J-STD-002
Method b : Not Applicable
95% of the terminations is to be soldered.
(Except exposed wire)
19 Electrical
Characterization
Measured : Inductance No defects
20 Flammability Per UL-94 Not Applicable
21 Board Flex Epoxy-PCB(1.6mm)
Deflection 2mm(min)
Holding time 60s
Meet Table B after testing.
Table B
22
erminal Strength Per AEC-Q200-006
force of 17.7N
or 60s
No defects
Murata Deviation Request: 5N/60s
8.Specification of Packaging
8.1 Appearance and Dimensions of paper tape (8mm-wide)
(in mm)
8.2 Specification of Taping
(1) Packing quantity (standard quantity)
10,000 pcs. / reel
(2) Packing Method
Products shall be packed in the cavity of the base tape and sealed by Cover tape.
(3) Sprocket hole
The sprocket holes are to the right as the tape is pulled toward the user.
(4) Spliced point
Base tape and Cover tape has no spliced point.
(5) Missing components number
Missing components number within 0.1% of the number per reel or 1 pc., whichever is greater,
and are not continuous. The Specified quantity per reel is kept.
8.3 Pull Strength
Cover tape 5N min.
Appearance No damage
DC resistance
change
Within ±10％
Direction of feed
2.0±0.05
0.80 max
3.5±0.05
8.0±0.2
0.75±0.03
1.180±0.03
