2
ICS9250-12
Pin Descriptions
Pin number Pin name Type Description
1 GNDREF PWR Gnd pin for REF clocks
2, 3 REF(0:1) OUT 14.318MHz reference clock outputs at 3.3V
4 VDDREF PWR Power pin for REF clocks
5 X1 IN XTAL_IN 14.318MHz crystal input
6 X2 OUT XTAL_OUT Crystal output
7, 13, 19 GNDPCI PWR Gnd pin for PCICLKs
8 PCICLK_F OUT
Free running PCI clock at 3.3V. Synchronous to CPU clocks. Not affected
by the PCI_STOP# input.
9, 11, 12, 14, 15,
17, 18
PCICLK[1:7] OUT PCI clock outputs at 3.3V. Synchronous to CPU clocks.
10, 16 VDDPCI PWR 3.3Volts power pin for PCICLKs
20, 24 GND66 PWR Gnd pin for 3V66 outputs
21, 22, 25, 26 3V66[0:3] OUT
66MHz outputs at 3.3V. These outputs are stopped when CPU_STOP# is
driven active..
23, 27 VDD66 PWR power pin for the 3V66 clocks.
28 SEL 133/100# IN
This selects the frequency for the CPU and CPU/2 outputs. High =
133MHz, Low=100MHz
29 GND48 PWR Ground pin for the 48MHz output
30 48MHz OUT Fixed 48MHz clock output. 3.3V
31 VDD48 PWR Power pin for the 48MHz output.
32, 33 SEL[0:1] IN Function select pins. See truth table for details.
34 SPREAD# IN
Enables spread spectrum when active(Low). modulates all the CPU, PCI,
IOAPIC, 3V66 and CPU/2 clocks. Does not affect the REF and 48MHz
clocks. 0.5% down spread modulation.
35 PD# IN
This asynchronous input powers down the chip when drive active(Low).
The internal PLLs are disabled and all the output clocks are held at a Low
state.
36 CPU_STOP# IN
This asychronous input halts the CPUCLK[0:3] and the 3V66[0:3] clocks at
ogic "0" when driven active(Low). Does not affect the CPU/2 clocks.
37 PCI_STOP# IN
This asynchronous input halts the PCICLK[1:7] at logic"0" when driven
active(Low). PCICLK_F is not affected by this input.
38 GNDCOR PWR Ground pin for the PLL core
39 VDDCOR PWR Power pin for the PLL core. 3.3V
43, 47 VDDLCPU PWR Power pin for the CPUCLKs. 2.5V
40, 44 GNDLCPU PWR Ground pin for the CPUCLKs
41, 42, 45, 46 CPUCLK[0:3] OUT
Host bus clock output at 2.5V. 133MHz or 100MHz depending on the state
of the SEL 133/100MHz.
48 GNDLCPU/2 PWR Ground pin for the CPU/2 clocks.
49, 50 CPU/2[0:1] OUT
2.5V clock outputs at 1/2 CPU frequency. 66MHz or50MHz depending on
the state of the SEL 133/100# input pin.
51 VDDLCPU/2 PWR Power pin for the CPU/2 clocks. 2.5V
52 GNDLIOAPIC PWR Ground pin for the IOAPIC outputs.
53, 54, 55 IOAPIC[0:2] OUT
IOAPIC clocks at 2.5V. Synchronous with CPUCLKs but fixed at
16.67MHz.
56 VDDLIOAPIC PWR Power pin for the IOAPIC outputs. 2.5V.