SPECIFICATION
MODEL RS-15-3.3 RS-15-12RS-15-5 RS-15-15 RS-15-24 RS-15-48
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT VOLTAGE ADJ. RANGE
LINE REGULATION
Note.4
LOAD REGULATION Note.5
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
3.3V 12V5V 15V 24V 48V
3A 1.3A3A 1A 0.625A 0.313A
0 ~ 3A 0 ~ 1.3A0 ~ 3A 0 ~ 1A 0 ~ 0.625A 0 ~ 0.313A
9.9W 15.6W15W 15W 15W 15.024W
80mVp-p 120mVp-p80mVp-p 120mVp-p 200mVp-p 200mVp-p
2.9 ~ 3.6V 10.8 ~ 13.2V4.75 ~ 5.5V 13.5 ~ 16.5V 22 ~ 27.6V 43.2 ~ 52.8V
±3.0% ±1.0%±2.0%
±0.5%±0.5%
±0.5%±1.5%
±1.0%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%±2.0%
±0.5%
1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load
70ms/230VAC 12ms/115VAC at full load
85 ~ 264VAC 120 ~ 370VDC
47 ~ 63Hz
3.8 ~ 4.45V 13.8 ~ 16.2V5.75 ~ 6.75V 17.25 ~ 20.25V 28.4 ~ 32.4V 55.2 ~ 64.8V
72% 81%77% 81% 82% 82%
COLD START 65A / 230VAC
<2mA / 240VAC
Above 105% rated output power
Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, EN55024, EN61000-6-1, light industry level, criteria A, EAC TP TC 020
-20 ~ +70 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH℃
±℃ ℃0.03%/ (0 ~ 50 )
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
1608.8Khrs min. MIL-HDBK-217F (25 )℃
62.5*51*28mm (L*W*H)
0.13Kg; 108pcs/15Kg/0.71CUFT
15W Single Output Switching Power Supply
RS-15 series
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
ENVIRONMENT
SAFETY &
EMC
(Note 6)
PROTECTION
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.230 230 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
7. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
No load power consumption<0.5W
All using 105 long life electrolytic capacitors℃
Withstand 300VAC surge input for 5 second
High operating temperature up to 70℃
Withstand 5G vibration test
High efficiency, long life and high reliability
3 years warranty
■
Features :
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Shut off o/p voltage, clamping by zener diode
0.35A/115VAC 0.25A/230VAC
OVER TEMPERATURE
Shut down o/p voltage, recovers automatically after temperature goes down
EMC IMMUNITY
EMC EMISSION
File Name:RS-15-SPEC 2018-01-12
UL60950-1, TUV EN60950-1 , .1, BSMI CNS14336-1 approvedCCC GB4943EAC TP TC 004,
Compliance to EN55032 (CISPR32) Class B, Class BEN61000-3-2,-3,GB9254 class B,GB17625.1, EAC TP TC 020, CNS13438
Bauar
Sicherheit
egel gema
tgepruft
od
be
www.
ID 2000000000
tuv.com
wac g
os
S
&
E
R33100
RoHS
