4
Device Selection Guide
Typical Color and Dominant Lamps without Lamps with Standos Luminous Intensity
Viewing Angle Wavelength Standos on Leads on Leads Iv (mcd)
[1,2,5]
@ 20 mA
2θ
1
/
2
(Deg.)
[4]
(nm), Typ.
[3]
(Outline Drawing A) (Outline Drawing B) Min. Max.
23° Amber 590 HLMP-EL24-L0000 HLMP-EL26-L0000 400 –
HLMP-EL24-MQ000 520 1500
HLMP-EL24-NR000 680 1900
HLMP-EL24-PS000 HLMP-EL26-PS000 880 2500
HLMP-EL24-QR000 1150 1900
HLMP-EL24-QRK00 1150 1900
HLMP-EL24-QS400 1150 2500
HLMP-EL24-QT000 HLMP-EL26-QT000 1150 3200
HLMP-EL24-RU000 HLMP-EL26-RU000 1150 4200
HLMP-EL24-RUK00 1150 4200
HLMP-EL24-SV000 HLMP-EL26-SV000 1900 5500
HLMP-EL24-SUK00 1900 4200
HLMP-EL24-SU400 1900 4200
HLMP-EL24-SVK00 1900 5500
HLMP-EL24-TW000 HLMP-EL26-TW000 2500 7200
HLMP-EL24-TWK00 2500 7200
Orange 605 HLMP-EJ24-QT000 1150 3200
Red-Orange 615 HLMP-EH24-PS000 HLMP-EH26-PS000 880 2500
HLMP-EH24-QT000 1150 3200
HLMP-EH24-RU000 1500 4200
HLMP-EH24-SV000 HLMP-EH26-SV000 1900 5500
Red 626 HLMP-EG24-M0000 HLMP-EG26-M0000 520 –
HLMP-EG24-PS000 HLMP-EG26-PS000 880 2500
HLMP-EG24-QT000 1150 4200
HLMP-EG24-RU000 HLMP-EG26-RU000 1500 4200
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package.
2. The optical axis is closely aligned with the package mechanical axis.
3. The dominant wavelength, λ
d
, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4. θ
1/2
is the o-axis angle where the luminous intensity is half the on-axis intensity.
5. Tolerance for each intensity bin limit is ± 15%.