8
Electrical/Optical Characteristics at T
A
= 25°C
Parameter Symbol Min. Typ. Max. Units Test Conditions
Forward Voltage I
F
= 20 mA
Amber (λ
d
= 590 nm) 2.02
Orange (λ
d
= 605 nm) V
F
1.98 2.4 V
Red-Orange (λ
d
= 615 nm) 1.94
Red (λ
d
= 626 nm) 1.90
Reverse Voltage V
R
5 20 V I
F
= 100 µA
Peak Wavelength: Peak of Wavelength of
Amber (λ
d
= 590 nm) 592 Spectral Distribution
Orange (λ
d
= 605 nm) λ
PEAK
609 nm at I
F
= 20 mA
Red-Orange (λ
d
= 615 nm) 621
Red (λ
d
= 626 nm) 635
Spectral Halfwidth ∆λ
1/2
17 nm Wavelength Width at
Spectral Distribution
1
/
2
Power Point at
I
F
= 20 mA
Speed of Response t
s
20 ns Exponential Time
Constant, e
-t/ts
Capacitance C 40 pF V
F
= 0, f = 1 MHz
Thermal Resistance Rθ
J-PIN
240 °C/W LED Junction-to-Cathode
Lead
Luminous Ecacy
[1]
Emitted Luminous
Amber (λ
d
= 590 nm) 480 Power/Emitted Radiant
Orange (λ
d
= 605 nm) h
v
370 lm/W Power
Red-Orange (λ
d
= 615 nm) 260
Red (λ
d
= 626 nm) 150
Luminous Flux j
v
500 mlm I
F
= 20 mA
Luminous Eciency
[2]
h
e
Emitted Luminous
Amber 12 lm/W Flux/Electrical Power
Orange 13
Red-Orange 13
Red 13
Note:
1. The radiant intensity, I
e
, in watts per steradian, may be found from the equation I
e
= I
v
/h
v
, where I
v
is the luminous intensity in candelas and h
v
is the luminous ecacy in lumens/watt.
2. h
e
= j
V
/ I
F
x V
F
, where j
V
is the emitted luminous ux, I
F
is electrical forward current and V
F
is the forward voltage.
Absolute Maximum Ratings at T
A
= 25°C
DC Forward Current
[1,2,3]
..................................................................................... 50 mA
Peak Pulsed Forward Current
[2,3]
.......................................................................100 mA
Average Forward Current
[3]
.................................................................................. 30 mA
Reverse Voltage (I
R
= 100 µA) ........................................................................................ 5 V
LED Junction Temperature ....................................................................................... 130°C
Operating Temperature .........................................................................-40°C to +100°C
Storage Temperature ..............................................................................-40°C to +100°C
Notes:
1. Derate linearly as shown in Figure 4.
2. For long term performance with minimal light output degradation, drive currents between 10
mA and 30 mA are recommended. For more information on recommended drive conditions,
please refer to Application Brief I-024.
3. Operating at currents below 1 mA is not recommended. Please contact your local representa-
tive for further information.