PDF: 09005aef833913f1/Source: 09005aef833913d6 Micron Technology, Inc., reserves the right to change products or specifications without notice.
ddr_mobile_sdram_only_152b_omap_pop.fm - Rev. E 06/09 EN
7 ©2008 Micron Technology, Inc. All rights reserved.
152-Ball x32 Mobile LPDDR (only) PoP (TI-OMAP)
Electrical Specifications
Electrical Specifications
Stresses greater than those listed under “Absolute Maximum Ratings” may cause perma-
nent damage to the device. This is a stress rating only, and functional operation of the
device at these or any other conditions above those indicated in the operational sections
of this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect reliability.
Notes: 1. V
DD
and V
DDQ
must be within 300mV of each other at all times. V
DDQ
must not exceed V
DD
.
Table 5: Absolute Maximum Ratings
Note 1 applies to all parameters in this table.
Parameters/Conditions Symbol Min Max Unit
V
DD
, V
DDQ
Supply voltage relative to V
SS
V
DD
, V
DDQ
–1.0 2.4 V
Voltage on any pin relative to V
SS
V
IN
–0.5 2.4 or (V
DDQ
+ 0.3V),
whichever is less
V
Storage temperature range
–55 +150 °C
Table 6: Recommended Operating Conditions
Parameters Symbol Min Typ Max Unit
Supply voltage
V
DD
1.70 1.80 1.95 V
I/O supply voltage
V
DDQ
1.70 1.80 1.95 V
Operating temperature range Commercial
0 – +70 °C
Industrial
-40 – +85 °C
