DATA SHEET • SKY13330-397LF SP2T SWITCH
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201407C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 17, 2012 5
Evaluation Board Description
The SKY13330-397LF Evaluation Board is used to test the
performance of the SKY13330-397LF SP2T Switch.
An Evaluation Board schematic diagram is provided in Figure 6.
An assembly drawing for the Evaluation Board is shown in
Figure 7.
Package Dimensions
The PCB layout footprint for the SKY13330-397LF is provided in
Figure 8. Typical case markings are shown in Figure 9. Package
dimensions for the 12-pin QFN are shown in Figure 10, and tape
and reel dimensions are provided in Figure 11.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
THE SKY13330-397LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Figure 6. SKY13330-397LF Evaluation Board Schematic
