239
Information
DC axial fans
DC fans - specials
ACmaxx / EC fans
AC axial fansAccessories
Representatives DC centrifugal fansAC centrifugal fans
2016-01
– Possible special versions:
(See page 12)
- Moisture protection
Max. 274 m
3
/h
– Material: Scroll housing: GRP
1)
(PBT)
Impeller: GRP
1)
(PA)
with sheet steel reinforced
– Direction of air flow: centrifugal
– Direction of rotation: Counterclockwise,
looking towards rotor
– Connection: To 2 single wires AWG 18.
– Highlights: Backward-curved impeller
– Weight: 1.0 kg
1) Fiberglass-reinforced plastic
Type m
3
/h cfm VAC Hz Bel(A) / Watts rpm
-1
°C Hours Hours
RER 160-28/56S 234 138 230 50 6.6 45.0 2 800 -30...+60 30 000 / 20 000 ¿
RER 160-28/06S 274 161 115 60 6.8 46.0 3 250 -30...+70 30 000 / 15 000 ¡
Subject to change
Nominal voltage
Air flow
Air flow
Frequency
Sintec sleeve bearings
Ball bearings
Power consumption
Nominal speed
Temperature range
Service life L
10
at 40 °C
at T
max
Curve
Sound power level
The air flow and sound level of the centrifugal
fans without external housing depend on their
individual installation conditions. The stated
air flow and noise levels have been measured
under the following conditions:
Centrifugal fan mounted on a base plate
260 x 260 mm.
Cover plate 260 x 260 mm with an air inlet of
Ø 100 mm, concentric to the impeller.
Tin-plated
Finger guards
from p. 242
Inlet rings
from p. 252
AC centrifugal fans
Ø 176 x 54 mm
Series RER 160
Nominal data
Air performance measured according to: ISO 5801.
Installation category A, with ebm-papst inlet ring without
contact protection.
Noise: Total sound power level L
W
A ISO 103002
measured on a hemisphere with a distance of 2 m.
Sound pressure level L
p
A measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
