© 2014 B u s s m a n n
www.cooperbussmann.com
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained
in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Life Support Policy: Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life sup-
port systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to
result in significant injury to the user.
0514 BU-SB12103 Page 2 of 2 Data Sheet 2110
Panel Mount Fuse Holders
HTC-35M
• 250V, 10A, 2.5W
• Threaded Cap/Carrier
•
Specifications: See Below
• Agency Information: 1, 4 (See table below)
F
U
S
E
M
ounting
Panel
Mounting Hole
1.476
"
(37.5mm)
.
217
"
(5.5mm)
.591"
(15.0mm)
.630
"
(16.0mm)
.472
"
+
.002"
_
(
12.0
+
.05mm
)
_
.
500
"
+
.002"
_
(
12.70
+
.05mm
)
_
3.0x0.51mm
12.00mm
+
0.0
–
0.1
12.70mm
+0.0
–0.1
Ø22mm
6.5mm
Ø15mm
3
7.5mm
M
ounting
Panel
M
ounting Hole
F
U
S
E
.217
"
(5.5mm)
.591
"
(15.0mm)
1.417
"
(
36.0mm)
.630
"
(16.0mm)
.472
"
+
.002"
_
(
12.0
+
.05mm
)
_
.
500
"
+
.002"
_
(
12.70
+
.05mm
)
_
F
U
S
E
M
ounting
P
anel
Mounting Hole
.
591
"
(15.0mm)
1.799
"
(45.7mm)
.
217
"
(5.5mm)
.630
"
(16.0mm)
.472
"
+
.002"
_
(
12.0
+
.05mm
)
_
.500
"
+
.002"
_
(
12.70
+
.05mm
)
_
HTC-40M
• 250V, 10A, 2.5W
• Screwdriver slot
• Specifications: See Below
• Agency Information: 1, 3 (See table below)
HTC-55M
• 250V, 10A, 2.5W
• Bayonet Cap/Carrier
• Specifications: See Below
• Agency Information: 1, 5 (See table below)
HTC-70M
• 250V, 10A, 2.5W
• Bayonet Cap/Carrier
• Specifications: See Below
• Agency Information: 1, 2 (See table below)
Specifications
Terminals — Tin-plated brass with 3mm (HTC-35M, -55M) and 4.8mm
(HTC-70M).
Molded Materials — High temperature thermoplastic that meets the
flammability ratings of UL 94VO; Glow Wire Test: 960°C per IEC 695-2-1.
Solderability — In accordance with IEC 68-2-20.
Electrical — Contact Resistance: _<10mW; Insulation Resistance: _>10MW;
Dielectric Strength _>2000Vac.
Shock Safety — PC2 (fuse holders).
Agency Information:
1) cURus: Guide 1ZLT2 & IZLT8, File E14853
2) VDE: 40004457
3) VDE: 40004458
4) VDE: 40004459
5) VDE: 40004463
Packaging Codes
Packaging Code Prefix Description
Blank 10 pieces packed into a carton
BK- 100 pieces packed into a cardboard shelf package
TR- HTC-200M only - 1000 pieces per box in Ammo pack
