CNA6P1X7R1H106K250AE

MULTILAYER CERAMIC CHIP CAPACITORS
April 2018
MULTILAYER CERAMIC CHIP CAPACITORS
CNA5 3216 [1206 inch]
CNA6 3225 [1210 inch]
* Dimensions code: JIS[EIA]
Automotive grade, Soft termination (Low resistance type)
CNA series
(2/6)
20180409 / mlcc_automotive_soft_cna_en.fm
MULTILAYER CERAMIC CHIP CAPACITORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
1. The products listed in this specification are intended for use in automotive applications under normal operation and usage conditions. The prod-
ucts are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more
stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or property.
Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for
any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed
below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment (excepting Pharmaceutical Affairs Law
classification Class1,2)   
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment   
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection
circuit/device or providing backup circuits in your equipment.
In addition, although the products listed in this specification are intended for use in automotive applications as described above, they are not
prohibited to use in general electronic equipment, whose performance and/or quality doesn’t require a more stringent level of safety or reliability,
or whose failure, malfunction or defect could not cause serious damage to society, person or property. Therefore, the description of this caution
will be applied, when the products are used in general electronic equipment under a normal operation and usage conditions.
2. We may modify products or discontinue production of a product listed in this catalog without prior notification.
3. We provide “Delivery Specification” that explain precautions for the specifications and safety of each product listed in this catalog. We strongly
recommend that you exchange these delivery specifications with customers that use one of these products.
4. If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the “Foreign Exchange and For-
eign Trade Control Law”. In such cases, it is necessary to acquire export permission in harmony with this law.
5. Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company.
6. We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you
use a product listed in this catalog. We do not grant license of these rights.
7. This catalog only applies to products purchased through our company or one of our company’s official agencies. This catalog does not apply to
products that are purchased through other third parties.
REMINDERS
Notice: Effective January 2013, TDK will use a new catalog number which adds product thickness and packaging specification detail.
This new catalog number should be referenced on all catalog orders going forward, and is not applicable for OEM part number
orders.
Please be aware the last five digits of the catalog number will differ from the item description (internal control number) on the
product label.
Contact your local TDK Sales representative for more information.
(Example)
Catalog issued date Catalog number Item description (on delivery label)
Prior to January 2013 C1608C0G1E103J(080AA) C1608C0G1E103JT000N
January 2013 and later C1608C0G1E103J080AA C1608C0G1E103JT000N
(3/6)
20180409 / mlcc_automotive_soft_cna_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
MULTILAYER CERAMIC CHIP CAPACITORS
CNA series
Soft termination (Low resistance type)
Type: CNA5/3216 [1206 inch], CNA6/3225 [1210 inch]
SERIES OVERVIEW
TDK multilayer ceramic chip capacitor low resistance type soft termination automotive grade CNA series is a product which conductive resin layers
are included in terminations. It's different from conventional soft termination CGA series which overall surface of termination is covered with the resin
layers, lower electric resistance has been realized because the current can pass through low resistive layers by covering only soldering positions
with the resin layers.
FEATURES
Lower electric resistance has been realized because the current can
pass through low resistive layers by covering only soldering positions
with conductive resin layers.
• Therefore, this product can contribute to reliability improvement by
promotion of replacement to soft termination type.
AEC-Q200 compliant.
APPLICATIONS
Fail-safe design in battery line.
Prevention of ceramic body cracks by board bending.
SHAPE & DIMENSIONS ELECTRODE STRUCTURE DRAWING
Soft termination Soft termination
(Conventional type) (Low resistance type)
Dimensional tolerances are typical values.
L
W
T
B
G
Body length
Body width
Body height
Terminal width
Terminal spacing
W
T
L
G
B
Sn
Ni
Conductive resin layer
Cu
Termination consists of 4 layers
including conductive resin layer.
The conductive resin
layer is only applied at
the soldering positions.
Dimensions in mm
Type L W T B G
CNA5 3.20±0.20 1.60±0.20 1.60±0.20 0.50 min. 1.00 min.
CNA6 3.20±0.30 2.50±0.20 2.50±0.20 0.50 min.
REACH
SVHC-Free
Lead
Free
RoHS
Pb
Halogen
Free
Br
Cl

CNA6P1X7R1H106K250AE

Mfr. #:
Manufacturer:
TDK
Description:
Multilayer Ceramic Capacitors MLCC - SMD/SMT 1210 50V 10uF 10% Soft Term AEC-Q200
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet