ToolStick-F411DC
4 Rev. 0.2
The following Simplicity Studio components are required for the C8051F411 ToolStick Starter Kit:
8051 Products Part Support
Simplicity Developer Platform
Download and install Simplicity Studio from www.silabs.com/simplicity-studio. Once installed, run Simplicity Studio
by selecting Start
Silicon LabsSimplicity StudioSimplicity Studio from the start menu or clicking the
Simplicity Studio shortcut on the desktop. Follow the instructions to install the software and click Simplicity IDE
to launch the IDE.
The first time the project creation wizard runs, the Setup Environment wizard will guide the user through the
process of configuring the build tools and SDK selection.
In the Part Selection step of the wizard, select from the list of installed parts only the parts to use during
development. Choosing parts and families in this step affects the displayed or filtered parts in the later device
selection menus. Choose the C8051F41x family by checking the C8051F41x check box. Modify the part selection
at any time by accessing the Part Management dialog from the Window
PreferencesSimplicity
Studio
Part Management menu item.
Simplicity Studio can detect if certain toolchains are not activated. If the Licensing Helper is displayed after
completing the Setup Environment wizard, follow the instructions to activate the toolchain.
5.1. Running the Features Demo
To create a project for the Features Demo example:
1. Click the Software Examples tile from the Simplicity Studio home screen.
2. In the Kit drop-down, select C8051F411 ToolStick Daughter Card, in the Part drop-down, select
C8051F411, and in the SDK drop-down, select the desired SDK. Click Next.
3. Select Example and click Next.
4. Under C8051F411 ToolStick Daughter Card, select TS F41x FeaturesDemo and click Finish.
5. Click on the project in the Project Explorer and click Build, the hammer icon in the top bar. Alternatively,
go to Project
Build Project.
6. Click Debug to download the project to the hardware and start a debug session.
7. Follow the instructions at the top of the example file to run the demo.
8. Press the Resume button to start the code running.
9. Press the Suspend button to stop the code.
10. Press the Reset the device button to reset the target MCU.
11. Press the Disconnect button to return to the development perspective.