OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TFPTL10L1000FL2B

P1-P3P4-P5
Radial Leaded PTC - Nickel Thin Film Linear Thermistors
TFPTL
Vishay
www.vishay.com For technical questions, contact: nlr@vishay.com
Document Number: 33027
1 Revision: 25-Oct-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DESCRIPTION
These thermistors are based on a Nickel thin film resistor
technology as thermal sensitive material. The device
consists of a thin film ceramic chip with two tinned copper
clad steel wire leads.
FEATURES
Nickel thin film PTC element
High stability over the entire temperature range
cUL recognized component: File E148885
Epoxy coated UL 94 V-0 approved
Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
Temperature measurement, sensing, compensation and
control in industrial and consumer applications. For on-board
or remote sensing.
MARKING
The thermistors are laser marked with value and tolerance
reference on an epoxy based coating.
(Example: 102F = 10 x 10
2
= 1000 1 %)
MOUNTING
By soldering or welding in any position.
Notes
(1)
Contact Vishay if closer TCR lot tolerance is desired
(2)
Other R
25
-values and tolerances are available upon request
(3)
Rated continuous working voltage is maximum working voltage or , whichever is less
QUICK REFERENCE DATA
PARAMETER VALUE
UNIT
DESCRIPTION TFPTL10 TFPTL15
Resistance value at 25 °C
(2)
100 to 1K 100 to 5K
Tolerance on R
25
-value
(2)
± 1; ± 5 %
TCR at 25 °C 4110 ppm/K
Tolerance on TCR at 25 °C
(1)
± 400 ppm/K
Operating temperature range:
at rated power - 55 to + 70 °C
at zero dissipation - 55 to + 150
Response time (in oil) 1.1 1.6 s
Dissipation factor (for information only) 2.9 3.4 mW/K
Maximum rated power at 70 °C (P
70
) 75 100 mW
Maximum working voltage RCWV
(3)
30 40 V
Climatic category (LCT/UCT/days) 55/150/56 -
Weight 0.12 0.14 g
STANDARD RESISTANCE VALUES at 25 °C in 
(2)
100 150 220 330 470 680 1K 1.5K 2.2K 3.3K 4.7K
120 180 270 390 560 820 1.2K 1.8K 2.7K 3.9K 5.0K
GLOBAL PART NUMBER INFORMATION
Global Part Numbering: TFPTL10L1001FL2B
PRODUCT
TYPE
SIZE CHARACTERISTIC
RESISTANCE
VALUE
TOLERANCE
LEAD
CONFIGURATION
PACK AG IN G
TFPT
Leaded
10
15
L = Linear 1000 = 100R
1001 = 1K
5001 = 5K
F = ± 1 %
J = ± 5 %
L2
H5
B = Bulk (500 pieces)
U = Ammopack (2500 pieces)
T = T/R (4000 pieces)
P
70
x R
L10L 00 F1PT B2F 1LT
TFPTL
Radial Leaded PTC - Nickel Thin Film Linear Thermistors
Vishay
Document Number: 33027 For technical questions, contact: nlr@vishay.com
www.vishay.com
Revision: 25-Oct-11 2
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS
Notes
• Bulk packed types have a standard lead length L = 25 mm minimum
• Thickness is defined as “T”
Note
• Zero power is considered as measuring power max. 1 % of rated power P
70
TFPTL DIMENSIONS in millimeters
SIZE L10 SIZE L15
L2 H5 L2 H5
Wb
max.
3.6 4.0
H
max.
3.5 3.8
SH
max.
(seating height) 5.0 6.2 5.2 6.5
d 0.5 ± 10 %
L 25 min.
F 2.5 ± 0.8 5.0 ± 0.8 2.5 ± 0.8 5.0 ± 0.8
T
max.
2.2 2.4
H
SH
L
F
L2
H
SH
L
F
H5
Wb
T
Wb
Component outline for
lead spacing 5.0 mm ± 0.8 mm
(flat bent leads)
Component outline for
lead spacing 2.5 mm ± 0.8 mm
(straight leads)
d
102F
471J
- 75 - 50 - 25 0 25 50 75 100 125 150 175
0
10
20
30
40
50
60
70
80
100
90
110
Temperature in °C
Power in % of P
70
Power Derating
TFPTL
Vishay
Radial Leaded PTC - Nickel Thin Film Linear Thermistors
www.vishay.com For technical questions, contact: nlr@vishay.com
Document Number: 33027
3 Revision: 25-Oct-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1)
TFPTs are ESD sensitive
PERFORMANCE
TEST MAXIMUM R
25
/R
25
(1)
Storage dry heat (5000 h at 125 °C) ± 0.25 %
High temperature exposure (1000 h at 150 °C) ± 0.3 %
Damp heat steady state, unloaded (1344 h at 40 °C/95 % RH) ± 0.2 %
Thermal cycling (15 min at - 55 °C, 15 min at 150 °C, 100 cycles) ± 0.2 %
Thermal cycling (15 min at - 55 °C, 15 min at 125 °C, 1000 cycles) ± 0.2 %
Short time overload (2.5 x P
70
for 60s at 70 °C) ± 0.2 %
Long term dissipation (1000 h rated power at 70 °C) ± 0.2 %
Resistance to soldering heat (10 s at 260 °C) ± 0.25 %
AVERAGE RATIO R/R
25
TFPTL ALL SIZES AND VALUES
TEMP. R/R
25
TEMP. R/R
25
TEMP. R/R
25
TEMP. R/R
25
TEMP. R/R
25
TEMP. R/R
25
- 20 0.825 20 0.980 60 1.150 100 1.337 140 1.541
- 19 0.828 21 0.984 61 1.155 101 1.342 141 1.547
- 18 0.832 22 0.988 62 1.159 102 1.347 142 1.552
- 17 0.836 23 0.992 63 1.164 103 1.352 143 1.557
- 16 0.839 24 0.996 64 1.168 104 1.357 144 1.563
- 55 0.702 - 15 0.843 25 1.000 65 1.173 105 1.362 145 1.568
- 54 0.705 - 14 0.847 26 1.004 66 1.177 106 1.367 146 1.574
- 53 0.708 - 13 0.851 27 1.008 67 1.182 107 1.372 147 1.579
- 52 0.712 - 12 0.854 28 1.012 68 1.186 108 1.377 148 1.584
- 51 0.715 - 11 0.858 29 1.017 69 1.191 109 1.382 149 1.590
- 50 0.719 - 10 0.862 30 1.021 70 1.196 110 1.387 150 1.595
- 49 0.722 - 9 0.866 31 1.025 71 1.200 111 1.392
- 48 0.725 - 8 0.869 32 1.029 72 1.205 112 1.397
- 47 0.729 - 7 0.873 33 1.033 73 1.209 113 1.402
- 46 0.732 - 6 0.877 34 1.037 74 1.214 114 1.407
- 45 0.736 - 5 0.881 35 1.042 75 1.219 115 1.412
- 44 0.739 - 4 0.885 36 1.046 76 1.223 116 1.417
- 43 0.743 - 3 0.889 37 1.050 77 1.228 117 1.422
- 42 0.746 - 2 0.892 38 1.054 78 1.232 118 1.427
- 41 0.749 - 1 0.896 39 1.059 79 1.237 119 1.432
- 40 0.753 0 0.900 40 1.063 80 1.242 120 1.437
- 39 0.756 1 0.904 41 1.067 81 1.246 121 1.442
- 38 0.760 2 0.908 42 1.071 82 1.251 122 1.448
- 37 0.763 3 0.912 43 1.076 83 1.256 123 1.453
- 36 0.767 4 0.916 44 1.080 84 1.261 124 1.458
- 35 0.771 5 0.920 45 1.084 85 1.265 125 1.463
- 34 0.774 6 0.924 46 1.089 86 1.270 126 1.468
- 33 0.778 7 0.927 47 1.093 87 1.275 127 1.473
- 32 0.781 8 0.931 48 1.097 88 1.280 128 1.478
- 31 0.785 9 0.935 49 1.102 89 1.284 129 1.484
- 30 0.788 10 0.939 50 1.106 90 1.289 130 1.489
- 29 0.792 11 0.943 51 1.110 91 1.294 131 1.494
- 28 0.796 12 0.947 52 1.115 92 1.299 132 1.499
- 27 0.799 13 0.951 53 1.119 93 1.303 133 1.505
- 26 0.803 14 0.955 54 1.124 94 1.308 134 1.510
- 25 0.806 15 0.959 55 1.128 95 1.313 135 1.515
- 24 0.810 16 0.963 56 1.133 96 1.318 136 1.520
- 23 0.814 17 0.967 57 1.137 97 1.323 137 1.526
- 22 0.817 18 0.971 58 1.141 98 1.328 138 1.531
- 21 0.821 19 0.975 59 1.146 99 1.333 139 1.536
P1-P3P4-P5

TFPTL10L1000FL2B

Mfr. #:
Buy TFPTL10L1000FL2B
Manufacturer:
Vishay / Dale
Description:
Thermistors - PTC PTC 100Rohms 1% Linea
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet