OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HSMA-C190

P1-P3P4-P6P7-P9
7
Figure 8. Recommended Pb-free reow soldering prole.
Figure 9. Recommended soldering pattern for HSMx-C110.
Figure 10. Recommended soldering pattern for HSMx-C170.
Figure 11. Recommended soldering pattern for HSMx-C190 and C191. Figure 12. Recommended soldering pattern for HSMx-C150.
5.0 (0.200)
1.0 (0.039)
1.5
(0.059)
1.5
(0.059)
2.0
(0.079)
0.9 (0.035)
0.2 (0.008)
0.9 (0.035)
CENTERING
BOARD
1.2 (0.047)
1.2
(0.047)
0.9
(0.035)
1.2
(0.047)
0.8 (0.031)
0.8
(0.031)
0.7
(0.028)
0.8
(0.031)
1.5 (0.059)
1.5
(0.059)
1.5
(0.059)
2.0
(0.079)
Note: All dimensions in millimeters (inches).
Figure 7. Recommended reow soldering prole.
Figure 6. Relative intensity vs. angle for HSMx-C170, C190, C191, and C150.
RELATIVE INTENSITY – %
1.00
0
ANGLE
0.80
0.60
0.50
0.70
0.20
0.10
0.30
0.40
0.90
-70 -50
-30 0 2030507090-90 -20-80 -60 -40 -10 10 40 60 80
230°C MAX.
10 SEC. MAX.
4°C/SEC.
MAX.
OVER 2 MIN.
TIME
TEMPERATURE
4°C/SEC. MAX.
140-160°C
–3°C/SEC.
217 °C
200 °C
60 - 120 SEC.
6 °C/SEC. MAX.
3 °C/SEC. MAX.
3 °C/SEC. MAX.
150 °C
255 - 260 °C
60 SEC. MAX.
10 SEC. MAX.
TIME
TEMPERATURE
8
Figure 13. Reeling orientation.
Figure 14. Reel dimensions.
10.50 ± 1.0 (0.413 ± 0.039)
59.60 ± 1.00
(2.346 ± 0.039)
Ø 20.20 MIN.
(Ø 0.795 MIN.)
6
PS
178.40 ± 1.00
(7.024 ± 0.039)
3.0 ± 0.5
(0.118 ± 0.020)
4.0 ± 0.5
(0.157 ± 0.020)
5.0 ± 0.5
(0.197 ± 0.020)
Ø 13.1 ± 0.5
(Ø 0.516 ± 0.020)
8.0 ± 1.0 (0.315 ± 0.039)
CATHODE SIDE
PRINTED LABEL
USER FEED DIRECTION
Note: All dimensions in millimeters (inches).
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5989-3604EN
AV02-0112EN - September 29, 2010
Figure 15. Tape dimensions.
Figure 16. Tape leader and trailer dimensions.
Convective IR Reow Soldering
For more information on IR reow
soldering, refer to Application Note
1060, Surface Mounting SMT LED
Indicator Components.
Storage Condition: 5 to 30˚C
@ 60% RH max.
Baking is required under the
condition:
a) Humidity Indicator Card is
>10% when read at 23±5°C.
b) Device exposed to factory
conditions <30°C/60% RH
more than 672 hours.
Baking recommended condition: 60
+/– 5˚C for 20 hours.
END START
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
8.00 ± 0.30
(0.315 ± 0.012)
USER FEED
DIRECTION
DIM. A
(SEE TABLE 1)
3.50 ± 0.05
(0.138 ± 0.002)
1.75 (0.069)
DIM. C
(SEE TABLE 1)
0.20 ± 0.05
(0.008 ± 0.002)
CARRIER TAPE
COVER TAPE
DIM. B
(SEE TABLE 1)
4.00 (0.157)
2.00 ± 0.05
(0.079 ± 0.002)
4.00 (0.157)
1.50 (0.059)
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
CATHODE
DIM. A
± 0.10 (± 0.004)
DIM. B
± 0.10 (± 0.004)PART NUMBER
DIM. C
± 0.10 (± 0.004)
HSMx-C170 SERIES 2.30 (0.091) 1.45 (0.057) 0.95 (0.037)
HSMx-C190 SERIES 1.75 (0.069) 0.90 (0.035) 0.90 (0.035)
HSMx-C110 SERIES 3.40 (0.134) 1.70 (0.067) 1.20 (0.047)
HSMx-C191 SERIES 1.85 (0.073) 0.88 (0.035) 0.85 (0.033)
HSMx-C150 SERIES 3.50 (0.138) 1.88 (0.074) 1.27 (0.050)
HSMx-C110
POSITION IN
CARRIER TAPE
DIM. B
(SEE TABLE 1)
DIM. A
(SEE TABLE 1)
R 1.0 ± 0.05
(0.039 ± 0.002)
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.
P1-P3P4-P6P7-P9

HSMA-C190

Mfr. #:
Buy HSMA-C190
Manufacturer:
Broadcom / Avago
Description:
Standard LEDs - SMD Amber Diffused 592nm 90mcd
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet