RE (ARE)
–3–
ASCTB104E 201407-T
2. Specifications
Note: * The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to [6] AMBIENT ENVIRONMENT
in GENERAL APPLICATION GUIDELINES.
REFERENCE DATA
1-(1). High frequency characteristics (Impedance 50Ω) (Standard PC board terminal)
Characteristics Item Specifications
Contact
Arrangement 1 Form C
Contact material Gold plating
Initial contact resistance, max. Max. 100mΩ (By voltage drop 10V AC 10mA)
Rating
Contact rating
1W (at 2.6 GHz [Impedance 75Ω;, V.S.W.R. Max.1.5] [Impedance 50Ω, V.S.W.R. Max.1.7])
10mA 24V DC (resistive load)
Contact carrying power 10W (at 2.6GHz [Impedance 75Ω, V.S.W.R. Max.1.5] [Impedance 50Ω, V.S.W.R. Max.1.7])
Max. switching voltage 30V DC
Max. switching current 0.5A DC
Nominal operating power 200mW
High frequency
characteristics (Initial)
(Impedance 75Ω)
V.S.W.R. Max. 1.2 (to 900MHz), Max. 1.5 (to 2.6GHz)
Insertion loss Max. 0.2dB (to 900MHz), Max. 0.5dB (to 2.6GHz)
Isolation Min. 60dB (to 900MHz), Min. 30dB (to 2.6GHz)
High frequency
characteristics (Initial)
(Impedance 50Ω)
V.S.W.R. Max. 1.3 (to 900MHz), Max. 1.7 (to 2.6GHz)
Insertion loss Max. 0.2dB (to 900MHz), Max. 0.7dB (to 2.6GHz)
Isolation Min. 60dB (to 900MHz), Min. 30dB (to 2.6GHz)
Electrical
characteristics
Insulation resistance (Initial)
Min. 100MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Breakdown
voltage
(Initial)
Between open contacts 500 Vrms for 1min. (Detection current: 10mA)
Between contact and coil 1,000 Vrms for 1min. (Detection current: 10mA)
Between contact and earth terminal 500 Vrms for 1min. (Detection current: 10mA)
Temperature rise (at 20°C)
Max. 60°C (By resistive method, nominal voltage applied to the coil: Contact carrying power:
10W, at 2.6GHz, [Impedance 75Ω, V.S.W.R. 1.5] [Impedance 50Ω, V.S.W.R. 1.7])
Operate time (at 20°C) Max. 10ms (Nominal operating voltage applied to the coil, excluding contact bounce time.)
Release time (at 20°C)
Max. 5ms (Nominal operating voltage applied to the coil, excluding contact bounce time.)
(without diode)
Mechanical
characteristics
Shock
resistance
Functional Min. 500 m/s
2
{50 G} (Half-wave pulse of sine wave: 11ms; detection time: 10μs.)
Destructive Min. 1,000m/s
2
{100 G} (Half-wave pulse of sine wave: 6ms.)
Vibration
resistance
Functional 10 to 55 Hz at double amplitude of 3mm (Detection time: 10μs.)
Destructive 10 to 55 Hz at double amplitude of 5mm
Expected life
Mechanical Min. 10
6
(at 180 cpm)
Electrical
Min. 3×10
5
(1W, 2.6GHz, [Impedance 75Ω, V.S.W.R. 1.5] [Impedance 50Ω, V.S.W.R. 1.7])
Min. 3×10
5
(10mA 24V DC (resistive load) (at 20cpm))
Conditions Conditions for operation, transport and storage*
Ambient temperature: –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight Approx. 5 g .18 oz
• V.S.W.R. characteristics • Insertion loss characteristics • Isolation characteristics
1
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
900MHz 3GHz
COM-NC
COM-NO
V.S.W.R.
Frequency
1.0
0.1
0
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
900MHz 3GHz
COM-NC
COM-NO
Insertion loss, dB
Frequency
100
10
0
20
30
40
50
60
70
80
90
900MHz 3GHz
COM-NO
COM-NC
Isolation, dB
Frequency
