INC.
11115 Vanowen St., North Hollywood, CA 91605 Phone (818) 985-8208
Toll-Free (800) 423-5659
Web site: http://www.vectorelect.com
PCB ACCESSORIES
Terminals
K32 J-Pin Terminals
for .042” diameter holes
Part Number
K32/C
K32/M
Qty
100
1000
Tin Plating
per MIL-T-10727C
per MIL-T-10727C
• Wire-wrap terminals installs in two
.042” diameter holes on 0.1” centers
• Short leg can be bent to secure pin
• Long post can share hole with T42-1
Micro-Klip
0.1”
.650”
.250”
T42-1
Micro-Klip
J Pin
“P” Pattern
Vectorbord
®
.025” Square
K32 J-Pin
The “J” pin, as accessory to the T42-1
Micro-Klip, has a long Wrap Post which
can extend through the same hole in
which the Micro-Klip is mounted.
The “J” also serves to hold the “Klip” firm-
ly in place when soldered. It may be
staked to the mounting board by bending
over the emergent short end of the “J”.
T42-1 Push-In Terminals
for .042” holes
• Wiring terminals for mounting leads or wires
horizontally or vertically (through board hole
• Connectors require no staking for most appli-
cations
• Horizontal slot holds up to seven wires,
depending upon thickness of wire
AVAILABLE AGAIN
