https://www.phoenixcontact.com/us/products/2952855
10/22/2014Page2/4
Relay Module-EMG 22-REL/KSR-230/21-2952855
Technical data
Ambient conditions
Ambient temperature (operation) -20 °C ... 50 °C
Ambient temperature (storage/transport) -20 °C ... 70 °C
Coil side
Nominal input voltage U
N
230 V AC/DC
Input voltage range in reference to U
N
0.9 ... 1.06
Typical input current at U
N
5 mA
Typical response time 8 ms
Typical release time 10 ms
Operating voltage display Yellow LED
Protective circuit Bridge rectifier Bridge rectifier
Varistor Varistor
Contact side
Contact type Single contact, 1-PDT
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Maximum inrush current 8 A
Limiting continuous current 6 A
Interrupting rating (ohmic load) max. 144 W (at 24 V DC)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
1500 VA (for 250 V AC)
General
Test voltage relay winding/relay contact
5 kV
rms
(50 Hz, 1 min.)
Test voltage relay contact/relay contact 1 kV AC (50 Hz, 1 min.)
Operating mode 100% operating factor
Degree of protection IP20
Mechanical service life
Approx. 5 x 10
7
cycles
Standards/regulations EN 50178
Rated surge voltage / insulation
4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV
between input circuit and output contact current paths.)
Rated insulation voltage 260 V AC
Pollution degree 2
Surge voltage category III
Mounting position any