Data Sheet HMC1099
Rev. A | Page 15 of 16
EVALUATION PCB
Use RF circuit design techniques for the circuit board used in
the application. Provide 50 Ω impedance for the signal lines and
directly connect the package ground leads and exposed paddle
to the ground plane, similar to that shown in Figure 39. Use a
sufficient number of via holes to connect the top and bottom
ground planes. The evaluation circuit board shown in Figure 39
is available from Analog Devices, Inc., upon request.
13525-039
Figure 39. Evaluation Printed Circuit Board
BILL OF MATERIALS
Table 7. Bill of Materials for Evaluation PCB EV1HMC1099LP5D
Item Description
J2, J3 SMA connectors
J1 DC pin
J4 Preform jumper
C1, C8 3.3 pF capacitors, 0603 package
C2 to C5 2200 pF capacitors, 0603 package
C6, C7, C9, C10 10 μF capacitors, 1210 package
L1 5.4 nH inductor, 0906 package
L2 0.9 μH inductor, 1008 package
L3 5.6 nH inductor, 0402 package
R1 68.1 Ω resistor, 0603 package
U1 HMC1099LP5DE
PCB 600-00625-00-2 evaluation PCB, circuit board material: Rogers 4350 or Arlon 25FR