CUSTOMER DRAWING
300 Constitution Dr
Menlo Park, CA
94025, U.S.A.
TITLE:
SOLDERSLEEVE DEVICE
WITH PRE-INSTALLED LEAD
IMMERSION RESISTANT
Unless otherwise specified dimensions are in
millimeters.
[Inches dimensions are shown in brackets]
Raychem
Devices
DOCUMENT NO.:
SO63-3-55-22-5-SE
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS
IN MICRON
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
REV:
D
DATE:
March 25, 2010
REVISED BY:
UNGUYEN
CAGE CODE:
06090
ECO NUMBER:
ECO-10-006476
SCALE:
NTS
SIZE:
A
SHEET:
1 of 1
All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Dimensions Cable Dimensions
Product
Name
A±1.75
(A±0.07)
øB
min
øC
min
H
min
øE
max
øF
min
øG
min
øD
max
J±0.5
(J±0.02)
SO63-3-55-22-5-SE 16.5
(0.650)
4.30
(0.170)
5.08
(0.200)
8.25
(0.325)
5.08
(0.200)
2.15
(0.085)
1.25
(0.050)
4.30
(0.170)
7.5
(0.295)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Fusible ring, melt point: 221°C.
3. MELTABLE RING: Environment resistant thermoplastic. Color: blue.
4. GROUND LEAD: MIL-W-22759/32-22-5. Color: green
APPLICATION
1. These parts will provide a shield termination assembly which will meet the requirements of MIL-S-83519/2 when installed in
accordance with Tyco Electronics RCPS-100-70 on cables rated for at least 125°C, meeting the dimensional criteria listed, having
tin or silver plated shields. See M83519 or consult Raychem for compatible insulation material.
2. Temperature rating: -55°C to +150°C.
For best results, prepare the cable as shown:
