EC centrifugal fan
backward curved, single inlet
R1G175-AB63-02
Technical features
Size 175 mm
Operation mode S1
Direction of rotation Clockwise, seen on rotor
Mounting position Any
EMC interference emission Acc. to EN 61000-6-3
EMC interference immunity Acc. to EN 61000-6-2
Insulation class "B"
Cable exit Variable
Condensate discharge holes None
Bearing motor Ball bearing
Mass 0.74 kg
Material of impeller PA plastic 6.6, fiberglass-reinforced
Motor protection Reverse polarity and locked-rotor protection
Product conforming to
standard
EN 60950-1
Surface of rotor Thick layer passivated
Number of blades 7
Type of protection IP 22
Technical features - Tach output
- Motor current limit
- Soft start
- Control input 0-10 VDC / PWM
Max. permissible ambient
motor temp. (transp./ storage)
+80 °C
Min. permissible ambient
motor temp. (transp./storage)
-40 °C
Approval CSA C22.2 Nr.77; UL 1004-1
Item no.: 50067-5-9980 · Revision status: KM66688 · Print-out on 13/09/2010 · Created by A. Kehm (VM---) · Page 2 of 5
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone: +49(0)7938/81-0 · Fax: +49(0)7938/81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
