Dimensions in
inches and
(millimeters)
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• This series is UL listed under Recognized Component
Index, file number E54214
• Typical I
R
less than 0.1µA
• High case dielectric strength
• Ideal for printed circuit boards
• High temperature soldering guaranteed:
260°C/10 seconds at 5 lbs. (2.3kg) tension
Mechanical Data
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: Polarity symbols marked on case
Mounting Position: Any
Weight: 0.06 oz., 1.7 g
Packaging codes/options:
1/600 EA. per Bulk Tray Stack
Case Style KBPM
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
2KBP 2KBP 2KBP 2KBP 2KBP 2KBP 2KBP
005M 01M 02M 04M 06M 08M 10M
Parameter Symbols 3N253 3N254 3N255 3N256 3N257 3N258 3N259 Units
* Maximum repetitive peak reverse voltage V
RRM
50 100 200 400 600 800 1000 V
* Maximum RMS voltage V
RMS
35 70 140 280 420 560 700 V
* Maximum DC blocking voltage V
DC
50 100 200 400 600 800 1000 V
Maximum average forward output rectified
current at T
A
=55°C
I
F(AV)
2.0 A
* Peak forward surge current single half sine-wave
superimposed on rated load (JEDEC Method) I
FSM
60 A
T
J
=150°C
Rating for fusing (t < 8.3ms) I
2
t15A
2
sec
Typical thermal resistance per leg
(1)
R
ΘJA
30
R
ΘJL
11
°C/W
* Operating junction and storage temperature range
T
J
, T
STG
-55 to +165 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
* Maximum instantaneous forward voltage drop
per leg at 3.14A
V
F
1.1
V
* Maximum DC reverse current T
A
=25°C 5.0
at rated DC blocking voltage per leg T
A
=125°C
I
R
500
µA
Typical junction capacitance per leg at 4.0V, 1MH
Z
C
J
25 pF
Notes: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x12mm) copper pads
* JEDEC registered values
