Data Sheet AD622
Rev. E | Page 5 of 16
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter Rating
Supply Voltage ±18 V
Internal Power Dissipation
1
650 mW
Input Voltage (Common Mode) ±V
S
Differential Input Voltage
2
±25 V
Output Short Circuit Duration Indefinite
Storage Temperature Range −65°C to +125°C
Operating Temperature Range −40°C to +85°C
Lead Temperature (Soldering, 10 sec)
1
Specification is for device in free air; see Table 4.
2
May be further restricted for gains greater than 14. See the Input Protection
section for more information.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the device in free air.
Table 4. Thermal Resistance
Package Type θ
JA
Unit
8-Lead PDIP (N-8) 95 °C/W
8-Lead SOIC_N (R-8) 155 °C/W
ESD CAUTION