HE PV Type
–3–
ASCTB101E 201603-T
2. Specifications
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981
*3. Coil hold voltage is the coil voltage after 100 ms following application of the nominal coil voltage.
*4. The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
*5. Release time will lengthen if a diode, etc., is connected in parallel to the coil. Be sure to verify operation under actual conditions.
Characteristics Item
Specifications
35A type 48A type 90A type
Contact
Arrangement 1 Form A
Contact resistance (Initial) Max. 100 mΩ (By voltage drop 6V DC 1A)
Max. 10 mΩ
(By voltage drop 5V DC 20A)
Contact material AgSnO
2 type AgNi type
Rating
Nominal switching capacity 35A 277V AC (Resistive load) 48 A 277V AC (Resistive load) 80A 277V AC (Resistive load)
Contact carring power 9,695VA (Resistive load) 13,296VA (Resistive load) 24,930VA (Resistive load)
Max. switching voltage 277V AC
Max. switching current 35A (AC) 48A (AC) 90A (AC)
Nominal operating power 1,920mW
Min. switching capacity
(Reference value)*
1
100mA 5V DC
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown
voltage (Initial)
Between open
contacts
2,000 Vrms for 1 min. (Detection current: 10mA)
Between contact
and coil
5,000 Vrms for 1 min. (Detection current: 10mA)
Surge breakdown voltage*
2
(Between contact and coil)
10,000 V (Initial)
Temperature rise
Max. 60°C 140°F (By resistive
method, contact carrying current:
35A, 100%V of nominal coil voltage
at 55°C 131°F.)
Max. 60°C 140°F (By resistive
method, contact carrying current:
48A, 100%V of nominal coil voltage
at 55°C 131°F.)
Max. 60°C 140°F (By resistive
method, contact carrying current:
90A, 100%V of nominal coil voltage
at 55°C 131°F.)
Max. 30°C 86°F (By resistive
method, contact carrying current:
35A, 60%V of nominal coil voltage at
85°C 185°F.)
Max. 30°C 86°F (By resistive
method, contact carrying current:
48A, 60%V of nominal coil voltage at
85°C 185°F.)
Max. 30°C 86°F (By resistive
method, contact carrying current:
90A, 60%V of nominal coil voltage at
85°C 185°F.)
Coil hold voltage*
3
40 to 100%V (Contact carrying
current: 35A, at 20°C 68°F),
50 to 100%V (Contact carrying
current: 35A, at 55°C 131°F),
50 to 60%V (Contact carrying
current: 35A, at 85°C 185°F)
40 to 100%V (Contact carrying
current: 48A, at 20°C 68°F),
50 to 100%V (Contact carrying
current: 48A, at 55°C 131°F),
50 to 60%V (Contact carrying
current: 48A, at 85°C 185°F)
40 to 100%V (Contact carrying
current: 90A, at 20°C 68°F),
50 to 60%V (Contact carrying
current: 90A, at 85°C 185°F)
Operate time (at 20°C 68°F) Max. 30 ms (nominal coil voltage, excluding contact bounce time)
Release time (at 20°C 68°F)*
5
Max. 10 ms (nominal coil voltage, excluding contact bounce time) (without diode)
Mechanical
characteristics
Shock
resistance
Functional 98 m/s
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10 μs.)
Destructive 980 m/s
2
(Half-wave pulse of sine wave: 6 ms.)
Vibration
resistance
Functional 10 to 55 Hz at double amplitude of 1.0 mm (Detection time: 10 μs.)
Destructive 10 to 55 Hz at double amplitude of 1.5 mm
Expected life
Mechanical Min. 10
7
(at 180 times/min.) Min. 1×10
6
(at 180 times/min.)
Electrical Resistive load
Min. 3×10
4
(35A 277V AC)
(ON : OFF = 1s : 9s, at 85°C 185°F)
Min. 3×10
4
(48A 277V AC)
(ON : OFF = 1s : 9s, at 85°C 185°F)
Min. 1×10
4
(80A 277V AC)
(ON : OFF = 1s : 9s, at 20°C 68°F)
Min. 1×10
3
(90A 250V AC)
(ON : OFF = 1s : 9s, at 85°C 185°F)
Conditions
Conditions for operation, transport
and storage*
4
Ambient temperature:
–50 to +55°C –58 to +131°F (When nominal coil voltage applied)
–50 to +85°C –58 to +185°F (When applied coil hold voltage is 50% to 60% of nominal coil voltage)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature);
Air pressure: 86 to 106 kPa
Max. operating speed 6 times/min. (at nominal switching capacity ON : OFF = 1s : 9s)
Unit weight Approx. 80 g 2.82 oz Approx. 85 g 3.00 oz