OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

834M1-2000

P1-P3
SENSOR SOLUTIONS /// Model 834M1 Rev E 9/2015
Page 1
MODEL 834M1 ACCELEROMETER
SPECIFICATIONS
Triaxial Piezoelectric Accelerometer
<22µA Current Consumption
Wide Bandwidth to 6kHz
Circuit Board Mountable
The Model 834M1 is a low cost, board
mountable triaxial accelerometer designed for high
amplitude embedded shock applications. The
accelerometer features a maximum current
consumption of 22 micro-amps and incorporates full
power and signal conditioning.
The model 834M1 is available in ±2000g to
±6000g ranges and provides a flat frequency response
up to greater than 6kHz. The standard model 834 offers
the same envelope with a lower maximum current
consumption of 4 micro-amps.
FEATURES
±2000g to ±6000g Dynamic Range
Low Cost Triaxial
Hermetically Sealed
Piezo-ceramic Crystals
-40° to +125°C Operating Range
Single Axis Configurations Available
APPLICATIONS
Asset Monitoring
Impact Testing
System Wake-Up Switch
Embedded Applications
Instrumentation
DIMENSIONS
MODEL 834M1 ACCELEROMETER
SENSOR SOLUTIONS /// Model 834M1 Rev E 9/2015
Page 2
PERFORMANCE SPECIFICATIONS
All values are typical at +24°C, 80Hz and 3.3Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to
update and change these specifications without notice.
Parameters
DYNAMIC
Notes
Range (g)
±2000
Sensitivity (mV/g)
0.62
±30%
Frequency Response (Hz)
2-6000
±2dB
Natural Frequency (Hz)
>30000
Non-Linearity (%FSO)
±2
Transverse Sensitivity (%)
<8
Shock Limit (g)
10000
ELECTRICAL
Bias Voltage (Vdc)
Exc Voltage / 2
Total Supply Current (µA)
1
<22
Excitation Voltage (Vdc)
3.3 to 5.5
Output Impedance (Ω)
<100
Insulation Resistance (MΩ)
>100
@100Vdc
Broadband Noise (µV)
40
0.1Hz-10kHz
Spectral Noise (mg/√Hz)
3.2
@ 10Hz
Spectral Noise (mg/√Hz)
0.6
@ 100Hz
Spectral Noise (mg/√Hz)
0.2
@ 1000Hz
Shielding
100%
Ground Isolation
Isolated from Mounting Surface
ENVIRONMENTAL
Temperature Response (%)
-20/+30 from -40°C to +125°C
Operating Temperature (°C)
-40 to +125
Storage Temperature (°C)
-40 to +125
Humidity
Hermetically Solder Sealed
PHYSICAL
Sensing Element
Ceramic (shear mode)
Case Material
Ceramic Base, Nickel Silver Cover
Weight (grams)
2.6
1
A lower current consumption of 4 micro-amps is available on model 834.
2
The model 834M1 is not to be reflow soldered at high temperature, manual soldering is recommended. See application note.
3
The model 834M1 can be operated with 2.8V excitation but the full-scale range will be limited.
Calibration supplied: CS-SENS-0100 NIST Traceable Amplitude Calibration at 80Hz
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this
information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the
right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the
suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or
circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not
convey any license under its patent rights nor the rights of others.
MODEL 834M1 ACCELEROMETER
SENSOR SOLUTIONS /// Model 834M1 Rev E 9/2015
Page 3
ORDERING INFORMATION
PART NUMBERING Model Number+Range
834M1-GGGG
l
l_____ Range (2000 is 2000g)
Example: 834M1-2000
Model 834M1, 2000g
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity Company
1000 Lucas Way
Hampton, VA 23666
Sales and Customer Service
Tel: +1-800-745-8008 or
+1-757-766-1500
Fax: +1-757-766-4297
t&m@meas-spec.com
EUROPE
MEAS France SAS
a TE Connectivity Company
26 Rue des Dames
F78340 Les Clayes-sous-Bois
France
Sales and Customer Service
Tel: +33 (0) 1 79 33 00
Fax: +33(0)1 34 81 03 59
t&m@meas-spec.com
ASIA
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Sales and Customer Service
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
t&m@meas-spec.com
P1-P3

834M1-2000

Mfr. #:
Buy 834M1-2000
Manufacturer:
TE Connectivity / Measurement Specialties
Description:
Accelerometers AC Resp Accel 3Axis LP Bd-mt 2000g
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet