Evaluation Board User Guide
UG-289
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
RedyKit for the ADP150 LDO
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 8
FEATURES
ADP150 ultralow noise voltage regulator
All-voltage options included for evaluation
Surface-mount ADP150 parts that can be easily soldered
Additional parts for prototyping
ADP150UJZ-REDYKIT CONTENTS
1 ADP150UJ-3.3-EVALZ evaluation board, V
OUT
= 3.3 V
1 ADP150UJ-1.8-EVALZ evaluation board, V
OUT
= 1.8 V
5 additional ADP150 voltage options in a labeled bag
GENERAL DESCRIPTION
The ADP150UJZ-RedyKit RedyKit™ allows simplified
prototyping and evaluation and is available for every standard
fixed output voltage option in the ADP150 product family. The
RedyKit allows the user to evaluate all voltage options with one
easy-to-order kit.
All surface-mount ADP150 parts are sorted and stored in the kit
with the Analog Devices, Inc., part number and fixed output
voltage clearly printed on each zip-top bag (see Figure 2).
The kit can be used in the engineering lab to evaluate required
voltage options. When other voltage options need to be
evaluated, a different part from the kit can be easily soldered
onto one of the evaluation boards supplied with the kit.
TYPICAL APPLICATION CIRCUITS
1
2
3
5
4
VOUT
NC
VIN
GND
EN
OFF
ON
C
OUT
1µF
V
OUT
= 1.8V
NC = NO CONNECT. DO NOT
CONNECT TO THIS PIN.
09908-002
Figure 1. ADP150UJZ-RedyKit
The ADP150UJZ-RedyKit comes with fixed 1.8 V and 3.3 V
evaluation boards. The kit also contains additional parts for
prototyping. The kit, which contains individually packaged parts
and the two evaluation boards, is packaged in an ESD foam pad
inside a treated cardboard box that measures 8.7" (L) × 7.9" (W)
× 1.75" (H), that is, 22 cm (L) × 20 cm (W) × 4.5 cm (H).
For additional information, also see the ADP150 evaluation
board user guide, UG-054.
