CUSTOMER DRAWING
REV:
B
DATE:
July 26, 2012
2012 Tyco Electronics Corporation. All rights reserved.
Tyco Electronics
300 Constitution Drive
Menlo Park, CA 94025
U.S.A.
TITLE:
HEXASHIELD ADAPTOR FOR
CODE 40 CONNECTORS
PLAIN CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DOCUMENT NO.
HEX40L-KC-45-YY-AY-1
DRAWN:
IRT
DATE:
May 20, 2008
CAGE CODE:
06090
REVISED PER
ECO-12-013539
FILE:
HEX40L-KC-45-YY-AY-1
SCALE:
NONE
SHEET:
3 OF 3
If this document is printed it becomes uncontrolled. Check for the latest revision.
APPLICATION
- These adaptors are designed to be mounted on the following connectors:
MIL-DTL-38999 Series III and IV
- They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular
connectors only.
- They are designed primarily for open wire bundle installation but are also designed to accept Raychem heat shrink
moulded parts where strain relief is required – see illustration.
- Use in conjunction with ferrules HET-A-0XX, which are purchased separately. Refer to HET-A-0XX Customer Drawing
for relevant selection details.
INSTALLATION
- See Installation Procedure RPIP-696-07 for assembly
- See Installation procedure RPIP-696-00 for shield termination.
PACKAGING
- All components are supplied in a plastic bag.
NOTES!
1. Item 4 - Star - is not
supplied with Hexashield Order Number 09.
2. Assembly is to be permanently marked with Code Identity Number and Part Number.
(e.g. 06090 HEX40L-KC-45-13-A3-1)
