© Semiconductor Components Industries, LLC, 2015
April, 2015 − Rev. 1
1 Publication Order Number:
NB3F8L3005C/D
NB3F8L3005C
3.3V / 2.5V / 1.8V / 1.5V
2:1:5 LVCMOS Fanout Buffer
Description
The NB3F8L3005C is a 2:1:5 Clock / Data fanout buffer operating
on a 3.3 V / 2.5 V Core V
DD
and two flexible 3.3 V / 2.5 V / 1.8 V /
1.5 V VDDO
x
supplies which must be equal or less than V
DD
.
A Mux selects between a Crystal input, or a differential/SE Clock /
Data inputs. Differential Inputs accept LVPECL, LVDS, HCSL, or
SSTL and Single−Ended levels. The MUX control line, SEL selects
CLK/CLK
, or Crystal input pins per Table 3. The Crystal input is
disabled when a Clock input is selected. Output enable pin, OE,
synchronously forces a High Impedance state (Hi−Z) when Low per
Table 4.
Outputs consist of five single−ended LVCMOS outputs.
Features
• Five LVCMOS / LVTTL Outputs up to 200 MHz
• Differential Inputs Accept LVPECL, LVDS, HCSL, SSTL, or
LVCMOS/LVTTL
• Crystal Interface
• Crystal Input Frequency Range: 10 MHz to 50 MHz
• Output Skew: 10 ps Typical
• Additive RMS Phase Jitter @ 156.25 MHz, (12 kHz – 20 MHz):
0.03 ps (Typical)
• Synchronous Output Enable
• Output Defined Level When Input is Floating
• Power Supply Modes:
♦ Single 3.3 V ± 5%
♦ Single 2.5 V ± 5%
♦ Mixed 3.3 V ± 5% Core/2.5 V ± 5% Output Operating Supply
♦ Mixed 3.3 V ± 5% Core/1.8 V ± 0.2 V Output Operating Supply
♦ Mixed 3.3 V ± 5% Core/1.5 V ± 0.15 V Output Operating Supply
♦ Mixed 2.5 V ± 5% Core/ 1.8 V ± 0.2 V Output Operating Supply
♦ Mixed 2.5 V ± 5% Core /1.5 V ± 0.15 V Output Operating Supply
• Two Separate Output Bank Power Supplies
• Industrial Temperature Range: −40°C to 85°C
• These are Pb−Free Devices
Applications
• Clock Distribution
• Networking and Communications
• High End Computing
• Wireless and Wired Infrastructure
End Products
• Servers
• Ethernet Switch/Routers
• AT E
• Test and Measurement
MARKING
DIAGRAM
QFN24
G SUFFIX
CASE 485DJ
www.onsemi.com
See detailed ordering and shipping information on page 12 o
this data sheet.
ORDERING INFORMATION
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
NB3F8L
3005C
ALYWG
G
1
(Note: Microdot may be in either location)