SPEC NO: DSAN8382 REV NO: V.2A DATE: SEP/15/2014 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203014449
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 2mA
iewing
Angle [1]
Min. Typ. 2θ1/2
Super Bright Orange (AlGaInP) Water Clear
1000 1800
10
°
*550 *1000
APDA3020LSECK/J4-PF
Parameter Super Bright Orange Units
Power dissipation 63 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Orange 611 nm IF=2mA
λD [1] Dominant Wavelength Super Bright Orange 605 nm I
F=2mA
Δλ1/2 Spectral Line Half-width Super Bright Orange 17 nm I
F=2mA
C Capacitance Super Bright Orange 27 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Super Bright Orange 1.8 2.1 V IF=2mA
I
R Reverse Current Super Bright Orange 10 uA VR = 5V
Min.
1.5
