OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PLT133/T9

P1-P3P4-P5
LifecyclePhase:
Revision : 7
Expired Period: Forever
Release Date:2013-05-29 11:03:58.0
1
Copyright © 2010, Everlight All Rights Reserved. Release Date : MAY.28.2013. Issue No: DPL-0000007_Rev.7
www.everlight.com
Photo-link Light Transmitter Unit
PLT133/T9
Features
High speed signal transmission（16Mbps NRZ Signal）
TTL interface compatible
+3~+5V single power source
The product itself will remain within RoHS compliant version.
Description
The opto-electrical component is assembled with a 660nm AlGaInP LED and a
driver IC. It transforms the electrical signal to optical signal and be transmitted by
1mm diameter plastic optical fiber.
The component is operated at +3~+5V and has good performance at low
dissipation current, steady light output and efficient light coupling.
Applications
Digital audio equipment
CD player
DVD player
Device Selection Guide
Chip
Dissipation Current (mA) Fiber Coupling Light Output (dBm)
Material λp(nm)
Operating Voltage
(Vcc)
Typ. Max. Min. Typ. Max.
AlGaInP 660 +3.0~5.0 5.5 10 -21 --- -15
LifecyclePhase:
Revision : 7
Expired Period: Forever
Release Date:2013-05-29 11:03:58.0
DATASHEET
Photo-link Light Transmitter Unit
PLT133/T9
2
Copyright © 2010, Everlight All Rights Reserved. Release Date : MAY.28.2013. Issue No: DPL-0000007_Rev.7
www.everlight.com
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit
Supply Voltage Vcc -0.5 to 7 V
DC Input Voltage Vin -0.5 to Vcc+0.5 V
Storage Temperature Tstg -40 to 85 ºC
Operating Temperature Topr -40 to 85 ºC
Soldering Temperature Tsol 260* ºC
Human Body Model ESD HBM 3K V
Machine Model ESD MM 300 V
Notes: Soldering time≦10 seconds.
Recommended Operating Conditions
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Supply Voltage Vcc - 2.7 3.0 5.50 V
Electro-Optical Characteristics (Ta=25ºC,Vcc=5.0V, 16Mbps)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Peak Emission Wavelength
p
640 660 680 nm
Transmission Rate NRZ Signal DC - 16 Mbps
Fiber Coupling Output Power Pf * Measuring Method 1 -21 - -15 dBm
Dissipation Current Icc * Measuring Method 1 3 - 10 mA
High Level Input Voltage Vih 2 - - V
Low Level Input Voltage Vil - - 0.8 V
Rise Time Tr - 15 20 ns
Fall Time Tf
[1] ; *2 NRZ Code
VFLED = 2.0V
- 15 20 ns
Low to High Delay Time tpLH * Measuring Method 2 - - 100 ns
High to Low Delay Time tpHL * Measuring Method 2 - - 100 ns
Pulse Width Distortion
tw
* Measuring Method 2 -15 - 15 ns
Jitter
tj
* Measuring Method 2 - 1.5 15 ns
*Note 1 : All Plastic Optical Fiber（980/1000um）
LifecyclePhase:
Revision : 7
Expired Period: Forever
Release Date:2013-05-29 11:03:58.0
DATASHEET
Photo-link Light Transmitter Unit
PLT133/T9
3
Copyright © 2010, Everlight All Rights Reserved. Release Date : MAY.28.2013. Issue No: DPL-0000007_Rev.7
www.everlight.com
*Circuit Layout Notice:
When power is off, it must be cut off together in Vin and Vcc pin.
If it only has Vcc power-off, LED will sure to be no output power.
Vcc Vin LED Condition
2.7~5.5V High ON
2.7~5.5V Low OFF
2.7~5.5V FLOATING ON
FLOATING 0~Vcc ON
Measuring Method
*1 Measuring method of optical output coupling fiber and dissipation current
PLT133 Transmitter Unit
Standard plastic optic fiber cable
GND
Vcc
Vin
0.1uF
5V
Signal
Input
DC
Optical power meter
PADVANTEST Q8221
The optical power meter must be calibrated
to have the wavelength sensitivity of 660nm
( 0 dBm = 1mW)
Icc
*2 Pulse response measuring method
Standard plastic optic fiber cable
16Mbps NRZ "0101" successive signal input
Standard Receiver Unit
CH2
CH1
50%
T
T
Input
tj1
Output
tj2
50%
t
w = TPHL-TPLH
PHL
PLH
5V
0.1uF
PLT133 Transmitter Unit
Vin
Vcc
Input
Signal
GND
P1-P3P4-P5

PLT133/T9

Mfr. #:
Buy PLT133/T9
Manufacturer:
Description:
Fiber Optic Transmitters, Receivers, Transceivers Photo Link
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet