Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Rev D
Ultra Low Profile 0805
3 dB, 90° Hybrid Coupler
The C1517J5003AHF is a low cost, low profile sub-miniature high
performance 3 dB coupler in an easy to use surface mount package. The
C1517J5003AHF is ideal for balanced power and low noise amplifiers, plus signal
distribution and other applications where low insertion loss and tight amplitude and
phase balance are required. The C1517J5003AHF is available on tape and reel for
pick and place high volume manufacturing.
All of the Xinger components are constructed from ceramic filled PTFE
composites which possess excellent electrical and mechanical stability. All parts
have been subjected to rigorous qualification testing and units are 100% RF tested.
Detailed Electrical Specifications:
Specifications subject to change without notice.
Features:
• 1500 – 1700 MHz
• 0.7mm Height Profile
• High Isolation & Low Loss
• LTE Bands: 24
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
• Halogen-Free
• 100% RF Tested
•
-
55°C to 85°C
ROOM (25°
°°
°C)
Parameter Min. Typ. Max Unit
Frequency 1500 1700 MHz
Port Impedance 50 Ω
Return Loss 21 25 dB
Isolation 24 28 dB
Insertion Loss* 0.2 0.3 dB
Amplitude Balance 0.4 1.0 dB
Phase Balance (relative to 90°) 0.7 4 Degrees
Power Handling 4 Watts
Operating Temperature -55 +85 ºC
(1.5-1.7GHZ)
(nSec)
Min. Typ. Max
0.093 0.108 0.123
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Nearside)
1.29±0.10
2.04±0.10
Orientation Marker
Denotes Pin Location
Side View
0.70±0.07
Bottom View (Farside)
2x 0.15
6x 0.98
4x 0.65
6x 0.30
6x 0.22
Orientation Marker
Denotes Pin Location
4x 0.37
6 5 4
321
Configuration-1
Input
GND
Isolated
Direct
GND
Coupled
5
4
2
1
6
3
Pin Configuration-2
Isolated
GND
Input
Coupled
GND
Direct
Configuration-3
Direct
GND
Coupled
Input
GND
Isolated
Configuration-4
Coupled
GND
Direct
Isolated
GND
Input
Mechanical Outline
-Dimensions are in Millimeters
-Tolerances are Non-Cumulative