EB4, EB6, EB8
www.vishay.com
Vishay Dale
Revision: 28-Feb-14
1
Document Number: 36006
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Edgeboard Connectors, 200 °C Burn-In Connectors, Dual Readout
ELECTRICAL SPECIFICATIONS
Current Rating: EB4 = 3 A; EB6 = 3 A; EB8 = 5 A
Test Voltage Between Contacts:
At sea level: EB4 = 650 V
RMS
; EB6 = 1500 V
RMS
;
EB8 = 1800 V
RMS
At 70 000 feet (21 336 meters): EB4 = 275 V
RMS
;
EB6 = 325 V
RMS
; EB8 = 450 V
RMS
Insulation Resistance: 5000 M minimum at 500 V
DC
potential
Contact Resistance: 30 mV maximum at rated current
Humidity: 48 h at 95 % relative humity at + 90 °C, insulation
resistance 5000 M
Shock: Threee 50G shocks in each of 3 mutually
perpendicular planes with no loss of continuity
FEATURES
• EB4, 0.100" (2.54 mm) C-C; EB6, 0.125" (3.17 mm) C-C;
and EB8, 0.156" (3.96 mm) C-C
• Right angle styles included for all models
• High temperature, glass reinforced PPS connector bodies
- 200 °C
• High reliability copper-nickel-tin alloy contacts
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• High reliability bifurcated bellows contacts
• Gold plated contacts
• Card extender style terminals standard
• Variety of mounting styles available
• Recognized under the Component Program of
Underwriters Laboratories, Inc. listed under file
E65524
APPLICATIONS
High temperature, long life connectors specifically designed
for burn-in oven and automatic temperature testing
applications.
Available in a wide range of sizes. Priced affordably and
competitively.
SPECIAL NOTE
When operating units at elevated temperatures, solder
having a melting point 50 °C above the operating
temperature should be used. Contact factory for specific
solder information.
MATERIAL SPECIFICATIONS
Body Material: 200 °C connectors: Fiberglass reinforced
polyphenylene sulfide, + 200 °C operating temperature,
flame retardant (UL 94 V-0)
Contacts: Copper-nickel-tin alloy per ASTM B 740
Plating: Gold plating (0.00003" (0.000762 mm) thick), over
0.00005" (0.00127 mm) minimum nickel underplate
