Electric Double Layer Capacitors(Gold Capacitor)/EN
Ñ EE200 Ñ
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately.
EN
Series:
Japan
n Recommended Applications
Memory card(power supply to hold memory)
Portable phone, PDA, Digital camera
n Dimensions in mm (not to scale)
1.Re-flow soldering method available (240°C)
2.Miniaturizd : Diaf6.8 x height 1.8mm max.
3.Longer life and environmentally friendly capacitors
0.5 0.1
2 0.3
0.15 0.05
1.8max.
6.8max.
1.9 0.4
12.5max.
0.5 0.1
0.15 0.05
6.8 max.
1.8max.
1.9 0.4
10.0max.
2 0.3
0.5 0.1
Type B
Type RL
Surface Mount Type
Please use it as a reference guide.
( ): Please fill A,B or RL, which means terminal type.
After 500 hours application of 3.3V. DC at +60°C, the capacitor shall meet the following limits.
-10 to +60°C
3.3 V .DC
0.2 F
10 µA MAX
n Specifications
Category temp. range
Maximum Operating Voltage
Nominal Capacitance
Stability at low
temperature and high
temperature
Endurance
Shelf Life
±30% of initial measured value at +20°C
<10 times of initial measured value at +20°C
Internal resistance
Internal resistance
±30% of initial measured value
< 20 times of initial specified value
After 500 hours storage at +60°C without load, the capacitor shall meet the specified limits
for Endurance.
After 500 hours storage at +40°C, 90 to 95% R.H., the capacitor shall meet the following
limits.
Category temp. range(-10°C)
Category temp. range(+60°C)
±30% of initial measured value at +20°C
< measured value at +20°C
Internal resistance
High temperature
High humidity
Internal resistance
±30% of initial measured value
< 1 k ohm or less
Country of Origin
Maximum Operating Current
Type A
Note: 1.When the capacitor is being used in high temperature and high humidity environment for long period,
brown deposited materials might be found around sealing area.However,the materials are insulators
and will not affect any electrical characteristcs of the capacitor.
2.Do not reflow soldering,when cell voltage is above 0.3V.
3.3
(pcs)
n Standard products
Maximum Oper-
ating Voltage
(V.DC)
Capacitance
(F)
Capacitance
range
Internal
resistance
(W) at 1kHz
Part number
Min. Packaging
QTY
(F)
0.2
200
0.16 to 0.36
Reel
2000
Mass
(g)
0.2 (Approx.)
EECEN0F204( )
n Features
The re-flow condition / taping dimension are explained on page 11.
Capacitance Change
Capacitance Change
Capacitance Change
Capacitance Change
