SPEC NO: DSAN2008 REV NO: V.2A DATE: APR/22/2015 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203013775
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1 / 10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
iewing
Angle [1]
Min. Typ. 2θ1/2
APGA1602SEC/E/KA Hyper Red (AlGaInP) Water Clear
80 200
*55 *120
150
°(H)
120
°(V)
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 632
nm I
F=20mA
λD [1] Dominant Wavelength Hyper Red 624
nm I
F=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 20
nm I
F=20mA
V
F [2] Forward Voltage Hyper Red 2.05 2.4 V IF=20mA
I
R Reverse Current Hyper Red
10 uA VR=5V
Parameter Hyper Red Units
Power dissipation 48 mW
DC Forward Current 20 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +100°C
Notes:
1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value.
2. Luminous intensity / luminous Flux: + / -15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.