1
DATASHEET
To request the full datasheet, please visit www.intersil.com/products/isl9120
Compact High Efficiency Low Power Buck-Boost
Regulator
ISL9120
The ISL9120 is a highly integrated buck-boost switching
regulator that accepts input voltages either above or below the
regulated output voltage. This regulator automatically transitions
between buck and boost modes without significant output
disturbance. The ISL9120 also has automatic bypass
functionality for when the input voltage is generally within 1% to
2% of the output voltage, there will be a direct bypass connection
between the VIN and VOUT pins. In addition to the automatic
bypass functionality, the ISL9120 also has forced bypass
functionality with the use of the BYP pin.
This device is capable of delivering up to 800mA of output
current (V
IN
= 2.5V, V
OUT
= 3.3V) and provides excellent
efficiency due to its adaptive current limit pulse frequency
modulation (PFM) control architecture.
The ISL9120 is designed for stand-alone applications and
supports a 3.3V fixed output voltage or variable output voltages
with an external resistor divider. The forced bypass power saving
mode can be chosen if voltage regulation is not required. The
device consumes less than 3.5µA of current over the operating
temperature range in forced bypass mode.
The ISL9120 requires only a single inductor and very few external
components. Power supply solution size is minimized by a
1.41mmx1.41mm WLCSP.
Features
• Accepts input voltages above or below regulated output
voltage
• Automatic bypass mode functionality
• Automatic and seamless transitions between buck and boost
modes
• Input voltage range: 1.8V to 5.5V
• Selectable forced bypass power saving mode
• Adaptive multilevel current limit scheme to optimize efficiency
at low and high currents
• Output current: up to 800mA (V
IN
= 2.5V, V
OUT
= 3.3V)
• High efficiency: up to 98%
• 41µA quiescent current maximizes light-load efficiency
• Fully protected for over-temperature and undervoltage
• Small 1.41mmx1.41mm WLCSP
Applications
• Smartphones and tablets
• Portable consumer and wearable devices
Related Literature
UG023, “ISL9120IIx-EVZ Evaluation Board User Guide”
FIGURE 1. TYPICAL FIXED OUTPUT APPLICATION
FIGURE 2. EFFICIENCY: V
OUT
= 3.3V, T
A
= +25°C
V
OUT
= 3.3V
VOUT
FB
C
2
22F TO 47F
VIN
V
IN
=
1.8V TO 5.5V
C
1
10F
ISL9120IINZ
GND PGND
LX1
LX2
L
1
1H
EN
BYP
FORCED BYPASS
BUCK-BOOST
ENABLE
DISABLE
70
75
80
85
90
95
100
1 10 100 1000
EFFICIENCY (%)
OUTPUT CURRENT (mA)
V
IN
= 3.6V
V
IN
= 3V
V
IN
= 4V
V
IN
= 3.4V
V
IN
= 2.5V
January 29, 2016
FN8659.1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Copyright Intersil Americas LLC 2015, 2016. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.