HV2225Y472KXVATHV

HV High Voltage Series
www.vishay.com
Vishay Vitramon
Revision: 11-Jan-17
4
Document Number: 45228
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
X7R DIELECTRIC - TYPICAL PARAMETERS
-10
-8
-6
-4
-2
0
2
4
6
-60 -40 -20 0 20 40 60 80 100 120 140
Δ
CAPACITANCE (%)
TEMPERATURE (°C)
TEMPERATURE COEFFICIENT OF CAPACITANCE
HOURS
1.0
0.0
-1.0
-2.0
% CAPACITANCE CHANGE
-3.0
-4.0
1 10 100 1000 10 000
AGING RATE
0.000
0.005
0.010
0.015
0.020
0.025
0.030
0.035
0.040
-55 -35 -15 5 25 45 65 85
DISSIPATION FACTOR
TEMPERATURE (
°
C)
DISSIPATION FACTOR VS.
TEMPERATURE
0.1
1
10
100
1000
1 10 100 1000 10 000
ESR / |Z| (Ω)
FREQUENCY (MHz)
IMPEDANCE / ESR VS. FREQUENCY
HV1812Y181KXMATHV
ESR
|Z|
0.1
1
10
100
1000
1 10 100 1000 10 000
ESR / |Z| (Ω)
FREQUENCY (MHz)
IMPEDANCE / ESR VS. FREQUENCY
HV1812Y152KXVATHV
ESR
|Z|
0.1
1
10
100
1000
1 10 100 1000 10 000
ESR / |Z| (Ω)
FREQUENCY (MHz)
IMPEDANCE / ESR VS. FREQUENCY
HV1825Y182KXMATHV
ESR
|Z|
HV High Voltage Series
www.vishay.com
Vishay Vitramon
Revision: 11-Jan-17
5
Document Number: 45228
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1)
Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(2)
Lower quantity for certain ratings, see “Selection Chart”
STANDARD PACKAGING QUANTITIES
(1)
CASE CODE TAPE SIZE
7" REEL QUANTITIES
PACKAGING CODE “T”
11 1/4" AND 13"
REEL QUANTITIES
PACKAGING CODE “R”
1812 12 mm 500
(2)
/ 1000 4000
1825 12 mm 500
(2)
/ 1000 4000
2220 12 mm 500
(2)
/ 1000 4000
2225 12 mm 500 4000
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and 70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
X7R DIELECTRIC - TYPICAL PARAMETERS
0.01
0.1
1
10
100
1 10 100 1000 10 000
ESR / |Z| (Ω)
FREQUENCY (MHz)
IMPEDANCE / ESR VS. FREQUENCY
HV1825Y103KXHATHV
ESR
|Z|
0.01
0.1
1
10
100
1 10 100 1000 10 000
ESR / |Z| (Ω)
FREQUENCY (MHz)
IMPEDANCE / ESR VS. FREQUENCY
HV2220Y103KXHATHV
ESR
|Z|
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

HV2225Y472KXVATHV

Mfr. #:
Manufacturer:
Vishay / Vitramon
Description:
Multilayer Ceramic Capacitors MLCC - SMD/SMT 4.7nF 4000volts 10% X7R High Voltage
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union