OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

THL 10-4815WI

P1-P3P4-P4
http://www.tracopower.com Page 1 of 4
DC/DC Converters
THL 10WI Series, 10 Watt
Features
◆ 10 Watt in 1” x 1” package
◆ Shielded metal case with isolated
baseplate
◆ Ultrawide 4:1 input voltage ranges
◆ Remote On/Off control
◆ Operating temp. range –40°C to +75°C
and up to +85°C with heat-sink
◆ I/O isolation voltage 1500 VDC
◆ Input filter meets EN 55022 class A
without external components
◆ Cost optimized design
◆ Industry standard pinout
◆ 3-year product warranty
The THL 10WI is a series of general purpose 10 Watt dc/dc-converters packed in
the compact 1” x 1” case and is a pin to pin replacement for the popular 1” x 2”
size products. The industrial standard pinout, the ultra wide 4:1 input voltage range
and the input filter that meets EN 55022 Class A without external components make
these converters easy to design in and suitable for to cost optimize many existing
and new applications.
The models have a remote On/Off control, short circuit and overvoltage protection
and are applicable in temperature ranges of up to +75°C or +85°C with optional
mounted heat sink. Typical applications are instrumentation, distributed power ar-
chitectures in communication and industrial electronics.
Order code Input voltage range Output voltage Output current max. Efficiency typ.
THL 10-2410WI
3.3 VDC 2200 mA 86 %
THL 10-2411WI
5.1 VDC 2000 mA 84 %
THL 10-2412WI
12 VDC 830 mA 86 %
THL 10-2413WI 9 – 36 VDC
15 VDC 660 mA 87 %
THL 10-2415WI
(24 VDC nominal)
24 VDC 410 mA 86 %
THL 10-2421WI
±5.0 VDC ±1000 mA 84 %
THL 10-2422WI
±12 VDC ±410 mA 86 %
THL 10-2423WI
±15 VDC ±330 mA 87 %
THL 10-4810WI
3.3 VDC 2200 mA 85 %
THL 10-4811WI
5.1 VDC 2000 mA 84 %
THL 10-4812WI
12 VDC 830 mA 86 %
THL 10-4813WI 18 – 75 VDC
15 VDC 660 mA 87 %
THL 10-4815WI
(48 VDC nominal)
24 VDC 410 mA 86 %
THL 10-4821WI
±5.0 VDC ±1000 mA 84 %
THL 10-4822WI
±12 VDC ±410 mA 86 %
THL 10-4823WI
±15 VDC ±330 mA 87 %
Models
CB
Scheme
UL 60950-1UL 60950-1
pending
226037
http://www.tracopower.com Page 2 of 4
DC/DC Converters
THL 10WI Series 10 Watt
Input Specifications
Input current at no load (at nominal input voltage) 24 V models: 30 mA typ.
48 V models: 20 mA typ.
Input current at full load (at nominal input voltage) 24 V; 3.3 VDC models: 400 mA typ.
24 V; other models: 500 mA typ..
48 V; 3.3 VDC models: 200 mA typ.
48 V; other models: 250 mA typ.
Start-up voltage / under voltage lockout 24 V models: 9 VDC / 8.5 VDC (or lower)
(hysteresis for assertive on) 48 V models: 18 VDC / 17 VDC (or lower)
(long term operation at undervoltage will
demage the converter!)
Surge voltage (1 sec. max.) 24 Vin models: 50 V max.
48 Vin models: 100 V max.
Conducted noise (input) EN 55022 class A, FCC part 15, level A
without external components
Recommended input fuse (slow blow) 24 V models: 2000 mA
48 V models: 1000 mA
Output Specifications
Voltage set accuracy ±2 %
Regulation – Input variation (Vmin – Vmax) 1.0 % max.
– Load variation single output models: 1.2 % max. (15 – 100 % load)
dual output models: 2.0 % max. (15 – 100 % balanced load)
Minimum load 15 %
Ripple and noise (20 MHz bandwidth) 60 mVp-p typ.
Temperature coefficient ±0.02 %/K
Output current limitation >110 % of Iout max.
Short circuit protection indefinite, automatic recovery
Transient response setting time 300 µs typ. (25 % load step change)
Maximum capacitive load 3.3 VDC models: 560 µF
5 VDC models: 560 µF
12 VDC models: 150 µF
15 VDC models: 150 µF
24 VDC models: 68 µF
±5.0 VDC models: 220 µF (each output)
±12 VDC models: 100 µF (each output)
±15 VDC models: 100 µF (each output)
http://www.tracopower.com Page 3 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
THL 10WI Series 10 Watt
General Specifications
Temperature ranges – Operating without heat sink –40°C to +75°C (with derating)
– Operating with heat sink –40°C to +85°C (with derating)
– Case temperature +100°C max.
– Storage –40°C to +125°C
Power derating – Operating without heat sink 2.5 %/K above +60°C
– Operating with heat sink 3.5 %/K above +70°C
Thermal inpedance – Natural convection 18.2 K/W
– Natural convection with heat sink 15.8 K/W
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >350’000 h
Isolation voltage (60 s) – Input/Output 1’500 VDC
Isolation capacitance – Input/Output 1200 pF max.
Isolation resistance – Input/Output (500 VDC) >1’000 MOhm
Remote On/Off – On: 2.5 ... 50 VDC or open circuit
– Off: 0 ... +1.0 VDC or short circuit pin 6 and pin 2
– Off idle current: 10 mA max.
Switching frequency (fixed) 400 kHz typ. (pulse width modulation PWM)
Altitude during operation 5‘000 m max. (16‘4 0 0 f t ) approved
Safety standards UL/cUL 60950-1, IEC/EN 60950-1
Safety approvals UL/cUL (File no. e188913, entry pending)
CB 60950-1:2005 (2nd Ed.)+ A1:2009 + A2:2013
CSA 60950-1
– Certification documents www.tracopower.com/overview/thl10wi
Environmental compliance – Reach
www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material metal
Baseplate non conductive FR4
Potting material epoxy (UL 94V-0 rated)
Weight 15 g (0.53oz)
Soldering temperature max. +260°C / 10 s
Application note : www.tracopower.com/overview/thl10wi
P1-P3P4-P4

THL 10-4815WI

Mfr. #:
Buy THL 10-4815WI
Manufacturer:
TRACO Power
Description:
Isolated DC/DC Converters
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet