OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HFA1135IBZ96

P1-P3P4-P6P7-P9P10-P12P13-P15
1
®
FN3653.6
HFA1135
360MHz, Low Power, Video Operational
Amplifier with Output Limiting
The HFA1135 is a high speed, low power current feedback
amplifier build with Intersil’s proprietary complementary
bipolar UHF-1 process. This amplifier features user
programmable output limiting, via the V
H
and V
L
pins.
The HFA1135 is the ideal choice for high speed, low power
applications requiring output limiting (e.g. flash A/D drivers),
especially those requiring fast overdrive recovery times. The
limiting function allows the designer to set the maximum and
minimum output levels to protect downstream stages from
damage or input saturation. The sub-nanosecond overdrive
recovery time ensures a quick return to linear operation
following an overdrive condition.
Component and composite video systems also benefit from
this operational amplifier’s performance, as indicated by the
gain flatness, and differential gain and phase specifications.
The HFA1135 is a low power, high performance upgrade for
the CLC501 and CLC502.
Features
• User Programmable Output Voltage Limiting
• Fast Overdrive Recovery . . . . . . . . . . . . . . . . . . . . . . <1ns
• Low Supply Current . . . . . . . . . . . . . . . . . . . . . . . . 6.8mA
• High Input Impedance . . . . . . . . . . . . . . . . . . . . . . . 2MΩ
• Wide -3dB Bandwidth. . . . . . . . . . . . . . . . . . . . . . 360MHz
• Very Fast Slew Rate. . . . . . . . . . . . . . . . . . . . . . 1200V/µs
• Gain Flatness (to 50MHz) . . . . . . . . . . . . . . . . . . ±0.07dB
• Differential Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.02%
• Differential Phase. . . . . . . . . . . . . . . . . . . . . 0.04 Degrees
• Pin Compatible Upgrade to CLC501 and CLC502
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Flash A/D Drivers
• High Resolution Monitors
• Professional Video Processing
• Video Digitizing Boards/Systems
• Multimedia Systems
•RGB Preamps
• Medical Imaging
• Hand Held and Miniaturized RF Equipment
• Battery Powered Communications
Pinout
HFA1135
(SOIC)
TOP VIEW
Ordering Information
PART
NUMBER
PART
MARKING
TEMP.
RANGE
(
o
C) PACKAGE
PKG.
DWG.
#
HFA1135IB 1135IB -40 to 85 8 Ld SOIC M8.15
HFA1135IB96 1135IB -40 to 85 8 Ld SOIC
Tape and Reel
M8.15
HFA1135IBZ
(See Note)
1135IBZ -40 to 85 8 Ld SOIC
(Pb-free)
M8.15
HFA1135IBZ96
(See Note)
1135IBZ -40 to 85 8 Ld SOIC
Tape and Reel
(Pb-free)
M8.15
HFA11XXEVAL DIP Evaluation Board for High Speed
Op Amps
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
2
3
4
8
7
6
5
NC
-IN
+IN
V-
V
H
V+
OUT
V
L
+
-
Data Sheet January 23, 2006
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2000, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
2
Absolute Maximum Ratings T
A
= 25
o
C Thermal Information
Voltage Between V+ and V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11V
DC Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V
SUPPLY
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8V
Output Current (Note 1) . . . . . . . . . . . . . . . . .Short Circuit Protected
30mA Continuous
60mA ≤ 50% Duty Cycle
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>600V
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . -40
o
C to 85
o
C
Thermal Resistance (Typical, Note 1)
θ
JA
(
o
C/W)
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Maximum Junction Temperature (Die Only) . . . . . . . . . . . . . . . .175
o
C
Maximum Junction Temperature (Plastic Package) . . . . . . . .150
o
C
Maximum Storage Temperature Range. . . . . . . . . . -65
o
C to 150
o
C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300
o
C
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θ
JA
is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
Electrical Specifications V
SUPPLY
= ±5V, A
V
= +1, R
F
= 510Ω (Note 3), R
L
= 100Ω, Unless Otherwise Specified
PARAMETER TEST CONDITIONS
(NOTE 2)
TEST
LEVEL
TEMP.
(
o
C) MIN TYP MAX UNITS
INPUT CHARACTERISTICS
Input Offset Voltage A 25 - 2 5 mV
AFull- 3 8 mV
Average Input Offset Voltage Drift B Full - 1 10 µV/
o
C
Input Offset Voltage
Common-Mode Rejection Ratio
∆V
CM
= ±1.8V A 25 47 50 - dB
∆V
CM
= ±1.8V A 85 45 48 - dB
∆V
CM
= ±1.2V A -40 45 48 - dB
Input Offset Voltage
Power Supply Rejection Ratio
∆V
PS
= ±1.8V A 25 50 54 - dB
∆V
PS
= ±1.8V A 85 47 50 - dB
∆V
PS
= ±1.2V A -40 47 50 - dB
Non-Inverting Input Bias Current A 25 - 6 15 µA
A Full - 10 25 µA
Non-Inverting Input Bias Current Drift B Full - 5 60 nA/
o
C
Non-Inverting Input Bias Current
Power Supply Sensitivity
∆V
PS
= ±1.8V A 25 - 0.5 1 µA/V
∆V
PS
= ±1.8V A 85 - 0.8 3 µA/V
∆V
PS
= ±1.2V A -40 - 0.8 3 µA/V
Non-Inverting Input Resistance ∆V
CM
= ±1.8V A 25 0.8 2 - MΩ
∆V
CM
= ±1.8V A 85 0.5 1.3 - MΩ
∆V
CM
= ±1.2V A -40 0.5 1.3 - MΩ
Inverting Input Bias Current A 25 - 0.1 4 µA
AFull- 3 8 µA
Inverting Input Bias Current Drift B Full - 60 200 nA/
o
C
Inverting Input Bias Current
Common-Mode Sensitivity
∆V
CM
= ±1.8V A 25 - 3 6 µA/V
∆V
CM
= ±1.8V A 85 - 4 8 µA/V
∆V
CM
= ±1.2V A -40 - 4 8 µA/V
Inverting Input Bias Current
Power Supply Sensitivity
∆V
PS
= ±1.8V A 25 - 2 5 µA/V
∆V
PS
= ±1.8V A 85 - 4 8 µA/V
∆V
PS
= ±1.2V A -40 - 4 8 µA/V
Inverting Input Resistance C 25 - 40 - Ω
Input Capacitance (Either Input) C 25 - 1.6 - pF
HFA1135
3
Input Voltage Common Mode Range (Implied by V
IO
CMRR, +R
IN
, and -I
BIAS
CMS tests)
A 25, 85 ±1.8 ±2.4 - V
A-40±1.2 ±1.7 - V
Input Noise Voltage Density (Note 5) f = 100kHz B 25 - 3.5 - nV/√Hz
Non-Inverting Input Noise Current Density (Note 5) f = 100kHz B 25 - 2.5 - pA/√Hz
Inverting Input Noise Current Density (Note 5) f = 100kHz B 25 - 20 - pA/√Hz
TRANSFER CHARACTERISTICS
Open Loop Transimpedance Gain (Note 5) A
V
= -1 C 25 - 500 - kΩ
AC CHARACTERISTICS A
V
= +2, R
F
= 250Ω, Unless Otherwise Specified
-3dB Bandwidth
(V
OUT
= 0.2V
P-P
, Note 5)
A
V
= +1, R
F
= 1.5kΩ B 25 - 660 - MHz
A
V
= +2, R
F
= 250Ω B 25 - 360 - MHz
A
V
= +2, R
F
= 330Ω B 25 - 315 - MHz
A
V
= -1, R
F
= 330Ω B 25 - 290 - MHz
Full Power Bandwidth
(V
OUT
= 5V
P-P
at A
V
= +2/-1,
4V
P-P
at A
V
= +1, Note 5)
A
V
= +1, R
F
= 1.5kΩ B25-90-MHz
A
V
= +2, R
F
= 250Ω B 25 - 130 - MHz
A
V
= -1, R
F
= 330Ω B 25 - 170 - MHz
Gain Flatness
(to 25MHz, V
OUT
= 0.2V
P-P
, Note 5)
A
V
= +1, R
F
= 1.5kΩ B25-±0.10 - dB
A
V
= +2, R
F
= 250Ω B25-±0.02 - dB
A
V
= +2, R
F
= 330Ω B25-±0.02 - dB
Gain Flatness
(to 50MHz, V
OUT
= 0.2V
P-P
, Note 5)
A
V
= +1, R
F
= 1.5kΩ B25-±0.22 - dB
A
V
= +2, R
F
= 250Ω B25-±0.07 - dB
A
V
= +2, R
F
= 330Ω B25-±0.03 - dB
Minimum Stable Gain A Full - 1 - V/V
OUTPUT CHARACTERISTICS R
F
= 510Ω, Unless Otherwise Specified
Output Voltage Swing (Note 5) A
V
= -1, R
L
= 100Ω A25±3 ±3.4 - V
AFull±2.8 ±3- V
Output Current (Note 5) A
V
= -1, R
L
= 50Ω A 25, 85 50 60 - mA
A -40 28 42 - mA
Output Short Circuit Current B 25 - 90 - mA
Closed Loop Output Resistance (Note 5) DC, A
V
= +2, R
F
= 250Ω B25-0.07- Ω
Second Harmonic Distortion
(A
V
= +2, R
F
= 250Ω, V
OUT
= 2V
P-P
, Note 5)
10MHz B 25 - -50 - dBc
20MHz B 25 - -45 - dBc
Third Harmonic Distortion
(A
V
= +2, R
F
= 250Ω, V
OUT
= 2V
P-P
, Note 5)
10MHz B 25 - -50 - dBc
20MHz B 25 - -45 - dBc
TRANSIENT CHARACTERISTICS A
V
= +2, R
F
= 250Ω, Unless Otherwise Specified
Rise and Fall Times
(V
OUT
= 0.5V
P-P
, Note 5)
Rise Time B 25 - 0.81 - ns
Fall Time B 25 - 1.25 - ns
Overshoot (Note 4)
(V
OUT
= 0 to 0.5V, V
IN
t
RISE
= 2.5ns)
+OS B 25 - 3 - %
-OS B 25 - 5 - %
Overshoot (Note 4)
(V
OUT
= 0.5V
P-P
, V
IN
t
RISE
= 2.5ns)
+OS B 25 - 2 - %
-OS B 25 - 10 - %
Slew Rate
(V
OUT
= 4V
P-P
, A
V
= +1, R
F
= 1.5kΩ)
+SR B 25 - 875 - V/µs
-SR (Note 6) B 25 - 510 - V/µs
Slew Rate
(V
OUT
= 5V
P-P
, A
V
= +2, R
F
= 250Ω)
+SR B 25 - 1530 - V/µs
-SR (Note 6) B 25 - 850 - V/µs
Electrical Specifications V
SUPPLY
= ±5V, A
V
= +1, R
F
= 510Ω (Note 3), R
L
= 100Ω, Unless Otherwise Specified (Continued)
PARAMETER TEST CONDITIONS
(NOTE 2)
TEST
LEVEL
TEMP.
(
o
C) MIN TYP MAX UNITS
HFA1135
P1-P3P4-P6P7-P9P10-P12P13-P15

HFA1135IBZ96

Mfr. #:
Buy HFA1135IBZ96
Manufacturer:
Renesas / Intersil
Description:
Video Amplifiers W/ANNEAL OPAMP 360MHZ CFB LIMIT IND
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet