Product Brief
Never stop thinking.
The QuadFALC® is an addition to Infineon's market leading FALC®
family of advanced E1/T1/J1 Framer And Line Interface Unit (LIU)
components. As a four port E1/T1/J1 framer and line interface unit
(LIU),QuadFALC is optimized for a range of network equipment including
Radio network Controllers, Node B line cards, PBX or SDH/SONET ADMs.
The QuadFALC features a unique clock generation unit that accepts
any reference clock between 1.02 andd 20 MHz as well as integrated
analog switches for impedance matching or protection switching. Using
industry leading QuadFALC Evaluation support tools, system developers
can shorten design cycles while creating a wide range of highly flexible, low
BOM E1/T1/J1 line cards.
Applications
■ Wireless base stations
■ Router
■ Multi-service access platforms,
■ Digital loop carriers
■ Remote access servers/concentrators
■ SONET/SDH Add/Drop multiplexers
Analog Line Interfaces
■ Four independent E1/T1/J1 long haul/short haul line interface units
■ Software programmable T1/E1/J1
■ Integrated analog switch for impedance matching (E1-75/120, T1-100 ,
J1-110) and protection switching (only PG-LBGA-160 package)
■ Crystal-less wander and jitter attenuation/compensation according to TR
62411 and ETS-TBR 12/13
■ Clock generation unit accepts any frequency reference clock from 1.02
MHz to 20 MHz
■ Programmable transmit pulse shape for flexible pulse generation
■ Receiver sensitivity exceeds -36 dB@772 kHz and -43 dB@1024 kHz
■ Clock signal generation & extraction according to ITU-T G.703 Sec. 13
Frame Aligners
■ ITU-T G.704 frame alignment/synthesis for 2.048/1.544 Mbit/s
www.infineon.com/falc
QuadFALC
®
Four-channel E1/T1/J1 Framer and Line
Interface Component
PEF 22554
COMMUNICATION
■ Programmable frame formats
– E1: Double- & CRC Multi-frame
– T1: F4, F12 (D4), Ext. Super Frame (ESF),
F72 (SLC96)
■ Detects and generates LOS, AIS and RAI alarms
■ CRC-4 performance monitoring
■ PRBS generation and monitoring
■ Detects & generates LOS, AIS & RAI alarms
■ System bus data rate scalable from 1.544 Mbit/s
up to 16 Mbit/s
■ Synchronization Supply Message (SSM)
generation and extreaction
HDLC Controllers
■ 12 HDLC controllers (three per channel)
including 128-byte deep FIFO buffers each
■ CAS controller with micro-processor or system
interface serial access
■ Supports signaling system #7
■ ANSI T1.403 Bit-Oriented Messages (BOM),
generates periodical performance reports
General Features
■ Software and pin compatible to previous
QuadFALC versions
■ Intel® or Motorola® type 8/16-bit microprocessor
interface
■ Serial SPI bus and serial SCI bus slave
interfaces
■ Low power operation (150mW / channel typical)
■ Dual voltage 1.8 V/3.3 V or single voltage 3.3 V
power supply
■ PG-LBGA-160, 15x15 mm with 1.0 mm ball pitch
■ PG-TQFP-144, 20x20 mm, 0,5 mm pitch
■ -40°C to +85°C operation
■ Rohs compliant packages
