NL7SZ19
http://onsemi.com
2
MAXIMUM RATINGS
Symbol Rating Value Unit
V
CC
DC Supply Voltage -0.5 to +7.0 V
V
IN
DC Input Voltage -0.5 to +7.0 V
V
OUT
DC Output Voltage -0.5 to +7.0 V
I
IK
DC Input Diode Current @ V
1
t -0.5 V -50 mA
I
OK
DC Output Diode Current @ V
1
t -0.5 V -50 mA
I
OUT
DC Output Sink Current "50 mA
I
CC
DC Supply Current per Supply Pin "100 mA
I
GND
DC Ground Current per Ground Pin "100 mA
T
STG
Storage Temperature Range -65 to +150 °C
T
L
Lead Temperature, 1 mm from Case for 10 Seconds 260 °C
T
J
Junction Temperature Under Bias +150 °C
q
JA
Thermal Resistance (Note 1) 250 °C/W
P
D
Power Dissipation in Still Air at 85°C 180 mW
MSL Moisture Sensitivity Level 1 -
F
R
Flammability Rating Oxygen Index: 28 to 34 UL 94 V-0 @ 0125 in -
V
ESD
ESD Withstand Voltage Human Body Model (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
> 2000
> 150
n/a
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm-by-1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA/JESD22-A114-A.
3. Tested to EIA/JESD22-A115-A.
4. Tested to JESD22-C101-A.
RECOMMENDED OPERATING CONDITIONS
Symbol Rating Value Unit
V
CC
DC Supply Voltage 1.65 to 5.5 V
V
CC
DC Supply Voltage, Data Retention 1.5 to 5.5 V
V
IN
Input Voltage 0 to 5.5 V
V
OUT
Output Voltage 0 to 5.5 V
T
A
Operating Temperature -40 to 85 °C
t
r
, t
f
Input Rise and Fall Times V
CC
@ 1.8 " 0.15 V
V
CC
@ 2.5 " 0.2 V
V
CC
@ 3.3 " 0.3 V
V
CC
@ 5.0 " 0.5 V
0 to 20
0 to 20
0 to 10
0 to 5
nS/V
q
JA
Thermal Resistance 350 °C/W
ORDERING INFORMATION
Device Order Number Package Shipping
†
NL7SZ19DFT2 SC70-6 3000 / Tape & Reel
NL7SZ19DFT2G SC70-6
(Pb-Free)
3000 / Tape & Reel
NL7SZ19MUR2G UDFN6
(Pb-Free)
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.