Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ OTHER COLORS MAY BE AVAILABLE UPON REQUEST - CONTACT TE FOR MORE INFORMATION.
COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED
TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Raychem, TE Connectivity, and TE connectivity (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-522-6752
Fax: 1-650-361-6297
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
© 2012-2017 TE Connectivity Ltd. family of companies. All Rights Reserved.
Title
SPECIFICATION CONTROL DRAWING
FDR25S
WIRE, RADIATION-CROSSLINKED, POLYESTER BLEND-INSULATED,
FLEXIBLE CABLE, 1000 VOLT
Date
4-3-17
Revision
K
This specification sheet forms a part of the latest issue of Raychem Specification WCD 3304 to the extent as specified herein.
CONDUCTOR - TIN-COATED COPPER INSULATION - FDR-25
COLOR - BLACK
RED
ORANGE
CONSTRUCTION DETAILS
PART
NUMBER
1/
WIRE
SIZE
(AWG)
CONDUCTOR
STRANDING
(number x
AWG)
DIAMETER
OF
STRANDED
CONDUCTOR
(inch) (mm)
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
(ohms/km)
DIAMETER
(inch) (mm)
MAXIMUM
WEIGHT
(lbs/1000 ft.)
(kg/km)
MINIMUM MAXIMUM MINIMUM NOMINAL MAXIMUM
FDR25S-16-* 16 259 x 40 .061 (1.55) .067 (1.70) 4.53 (14.9) .093 (2.36) .097 (2.46) .101 (2.57) 11.5 (17.1)
FDR25S-14-* 14 665 x 42 .078 (1.98) .086 (2.18) 2.96 (9.71) .112 (2.84) .116 (2.95) .120 (3.05) 17.9 (26.6)
FDR25S-12-* 12 665 x 40 .096 (2.44) .106 (2.69) 1.89 (6.20) .132 (3.35) .136 (3.45) .140 (3.56) 26.1 (38.8)
FDR25S-10-* 10 665 x 38 .126 (3.20) .140 (3.56) 1.12 (3.67) .164 (4.17) .171 (4.34) .178 (4.52) 43.3 (64.4)
FDR25S-8-* 8 1078 x 38 .160 (4.06) .180 (4.57) .711 (2.33) .244 (6.20) .256 (6.50) .268 (6.81) 77.6 (115.)
FDR25S-6-* 6 1764 x 38 .197 (5.00) .221 (5.61) .450 (1.48) .288 (7.32) .303 (7.70) .318 (8.08) 117. (174.)
FDR25S-4-* 4 1666 x 36 .250 (6.35) .290 (7.37) .275 (.902) .369 (9.37) .384 (9.75) .399 (10.1) 176. (262.)
FDR25S-2-* 2 2646 x 36 .323 (8.20) .347 (8.81) .171 (.561) .498 (12.6) .515 (13.1) .532 (13.5) 306. (455.)
FDR25S-0-* 0 4256 x 36 .390 (9.91) .430 (10.9) .110 (.361) .582 (14.8) .602 (15.3) .622 (15.8) 442. (658.)
FDR25S-00-* 00 5320 x 36 .440 (11.2) .480 (12.2) .087 (.285) .644 (16.4) .668 (17.0) .692 (17.6) 551. (820.)
FDR25S-000-* 000 6783 x 36 .510 (13.0) .550 (14.0) .068 (.223) .730 (18.5) .754 (19.2) .778 (19.8) 699. (1040.)
FDR25S-0000-* 0000 8379 x 36 .640 (16.3) .680 (17.3) .055 (.180) .860 (21.8) .884 (22.5) .908 (23.1) 933. (1388.)
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 125°C
Maximum continuous conductor temperature
VOLTAGE RATING: 1000 volts (rms) at sea level
COLOR: Black preferred
CONCENTRICITY: 70% (minimum)
INSULATION ELONGATION AND TENSILE STRENGTH
(both layers pulled together):
Elongation, 300% (minimum)
Tensile Strength, 2000 lbf/in
2
(14 N/mm
2
) (minimum)
INSULATION (JACKET) FLAWS: Spark Test, 3.0 kV (rms)
1/ PART NUMBER: The "*" in the part numbers above shall be replaced by a color code designator.
Example: AWG 8, black: FDR25S-8-0
Page 1 of 1
