DATA SHEET
SE2601T: 2.4 GHz WLAN Switch/LNA Front-End
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202399B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 9, 2013 3
Absolute Maximum Ratings
These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage
to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions
defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected
workstations.
Symbol Definition Min. Max. Unit
Vdd Supply Voltage on Vdd 0 3.6 V
VON, cc DC input on control pins -0.5 Vdd+0.5 V
P
TXIN
TX Input Power, ANT terminated in 50Ω match - 27 dBm
TA Operating Temperature Range -40 85 °C
TSTG Storage Temperature Range -40 150 °C
ESD
HBM
JEDEC JESD22-A114
all pins
1000 V
Recommended Operating Conditions
Symbol Parameter Min. Typ. Max. Unit
TA Ambient temperature -40 25 85 °C
Vdd Supply voltage, relative to GND = 0 V 2.7 3.3 3.6 V
VON, cc Control voltage, relative to GND = 0 V 0 - Vdd V
DC Electrical Characteristics
Conditions: Vdd = 3.3 V, TA = 25 °C, as measured on Skyworks SE2601T EK1 evaluation board (de-embedded to
device), all unused ports terminated with 50 ohms, unless otherwise noted
Symbol Parameter Conditions Min. Typ. Max. Unit
Idd LNA current Gain mode - 10 13 mA
Idd LNA current Bypass mode 60 μA
ION LNA control current - 20 uA
IC1
BT port control
current
- 20 μA
Ic3
TX port control
current
- 20 µA
VIH Logic input high 2.7 3.6 V
VIL Logic input low 0 0.3 V
