PEC11L-4125F-S0020 Datasheet PEC11L-4215F-S0015, PEC11L-4225F-N0015, PEC11L-4220F-N0015 | P1-P2

Features

n Push switch option

n Compact, low proﬁle

n High rotational life and switch life

n Metal bushing/shaft

n RoHS compliant*

PEC11L Series - 11 mm Low Prole Encoder

*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.

**Devices are tested using standard noise reduction ﬁlters. For optimum performance, designers should use noise reduction ﬁlters in their circuits.

Speciﬁcations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁc applications.

Electrical Characteristics

Output ....................................................................................................................................................................................................2-bit quadrature code

Closed Circuit Resistance ................................................................................................................................................................ 100 milliohms maximum

Contact Rating .............................................................................................................................................................................................. 10 mA @ 5 VDC

Insulation Resistance ...................................................................................................................................................................100 megohms @ 250 VDC

Dielectric Withstanding Voltage

Sea Level ............................................................................................................................................................................................... 300 VAC minimum

Electrical Travel .....................................................................................................................................................................................................Continuous

Contact Bounce (60 RPM)..........................................................................................................................................................................10 ms maximum**

RPM (Operating) ..............................................................................................................................................................................................60 maximum**

Environmental Characteristics

Operating Temperature Range ......................................................................................................................................-25 °C to +80 °C (+13 °F to +176 °F)

Storage Temperature Range ..........................................................................................................................................-40 °C to +85 °C (-40 °F to +185 °F)

Humidity..................................................................................................................................................................MIL-STD-202, Method 103B, Condition A

Vibration ................................................................................................................................................................10~55~10 Hz / 1 min. / Amplitude 1.5 mm

Shock............................................................................................................................................................................................................................. 100 G

Rotational Life.................................................................................................................................................................................. 100,000 cycles minimum

IP Rating ..........................................................................................................................................................................................................................IP 40

Mechanical Characteristics

Mechanical Angle ......................................................................................................................................................................................... 360 ° continuous

Torque

Detent ................................................................................................................................................................................20-200 gf-cm (0.27 to 2.8 oz-in)

Running .........................................................................................................................................................................10 to 150 gf-cm (0.14 to 2.1 oz-in)

Mounting ................................................................................................................................................................................70 N-cm (6.2 lb-in) maximum

Shaft Side Load (Static).................................................................................................................................................................2.04 kgf (4.5 lbs) minimum

Shaft Strength (Push-Pull) ............................................................................................................................................................................. 100 N (22.5 lbs)

Weight .............................................................................................................................................................................................5 gm (0.17 oz) maximum

Terminals ................................................................................................................................................................................. Printed circuit board terminals

Soldering Condition

Wave Soldering ............................................................................ Sn95.5/Ag2.8/Cu0.7 solder with no-clean ux: 260 °C ±5 °C max. for 3-5 seconds

Hand Soldering ................................................................................................................................................................................. Not recommended

Hardware ....................................................................................................................... One at washer and one mounting nut supplied with each encoder

Switch Characteristics

Switch Type ....................................................................................................................................................................Contact Push ON Momentary SPST

Switch Life .................................................................................................................................................................................100,000 actuations minimum

Power Rating (Resistive Load) ..................................................................................................................................................................... 10 mA at 5 V DC

Switch Travel ......................................................................................................................................................................................................0.5 ± 0.3 mm

Switch Actuation Force ........................................................................................................................................................610 ± 306 gf (8.47 ± 4.24 oz.-in.)

How To Order

PEC11L - 4 0 20 F - S 0015

Model

Terminal Conguration

4 = PC Pin Horizontal/Rear Facing

Detent Option

0 = No Detents (15, 20 pulses)

1 = 20 Detents (20 pulses)

2 = 30 Detents (15 pulses)

Standard Shaft Length

15 = 15.0 mm

20 = 20.0 mm

25 = 25.0 mm

Shaft Style

F = Metal Flatted Shaft

K = Metal Knurled Shaft

Switch Conguration

S = Push Momentary Switch

N = No Switch

Resolution

0015 = 15 Pulses per 360 ° Rotation

0020 = 20 Pulses per 360 ° Rotation

*RoHS COMPLIANT

LEAD FREE

*RoHS COMPLIANT

VERSIONS

AVAILABLE

LEAD FREE

VERSIONS ARE

RoHS COMPLIANT*

12.8

(.504)

11.8

(.465)

13.2

(.520)

L ± 0.5

(L ± .020)

0.75

(.030)

M7XP

3 PLCS.

0.5

(.020)

1.0 +0.2/-0

(.039 +.008/-0)

DIA. 3 PLCS.

1.4

(.055)

2.1

(.083)

2.0

(.079)

0.25

(.010)

1.1

(.043)

7.5

(.295)

6.0

(.236)

6.0

(.236)

7.5

(.295)

4.5

(.177)

6.0 +0/-0.1

(.236 +0/-.004)

DIA.

5.0

(.197)

5.0

(.197)

4.5

(.177)

DIA.

18 TEETH

KNURLED

1.0

(.039)

6.0 +0/-0.1

(.236 +0/-.004)

AC B

12.8

(.504)

11.8

(.465)

5.0

(.197)

13.2

(.520)

L ± 0.5

(L ± .020)

0.75

(.030)

M7XP

SWITCH TRAVEL

0.5 +0.4/-0.3

(.020 +.016/-.012)

1.0 +0.2/-0

(.039 +.008/-0)

DIA. 5 PLCS.

1.4

(.055)

2.1

(.083)

2.0

(.079)

7.5

(.295)

7.0

(.276)

6.0

(.236)

6.0

(.236)

7.5

(.295)

7.0

(.276)

4.5

(.177)

6.0 +0/-0.1

(.236 +0/-.004)

DIA.

5.0

(.197)

5.0

(.197)

3.0

(.118)

3.0

(.118)

4.5

(.177)

PEC11L-4xxxF-Sxxxx

PEC11L-4xxxF-Nxxxx

3.0

(.118)

0.8

(.031)

13.6

(.535)

REV. 02/17

Speciﬁcations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁc applications.

PEC11L Series - 11 mm Low Prole Encoder

Product Dimensions

DIMENSIONS:

(INCHES)

L B F P A C

(.591)

5.0

(.197)

7.0

(.276)

7.0

(.276)

6.0

(.236)

7.0

(.276)

(.787)

7.0

(.276)

10.0

(.394)

7.0

(.276)

6.0

(.236)

7.0

(.276)

(.984)

7.0

(.276)

12.0

(.472)

12.0

(.472)

10.0

(.394)

11.0

(.433)

Applications

Level control, tuning and timer settings in:

Audio-visual equipment

Consumer electric appliances

Environmental controls

Musical instrumentation

Communications equipment

Quadrature Output Table

A Signal

OFF

B Signal

CCW

Suggested Filter Circuit

Switch Circuit

A Signal

5 VDC

10K OHMS 10K OHMS

TERMINAL B

TERMINAL C

TERMINAL A

0.01 μF 0.01 μF

ENCODER

OFF

B Signal

A Signal

5 VDC

10K OHMS 10K OHMS

TERMINAL B

TERMINAL C

TERMINAL A

0.01 μF 0.01 μF

ENCODER

OFF

B Signal

Dim. Tol.

<10.0

(<.394)

±0.3

(±.012)

10.0 ~ 100

(.394 ~ 3.937)

±0.5

(±.020)

P1-P2

PEC11L-4125F-S0020

Mfr. #:

Buy PEC11L-4125F-S0020

Manufacturer:

Bourns

Description:

Encoders ENCODER

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

PEC11L-4125F-S0020

PEC11L-4125F-S0020

Products related to this Datasheet