AFBR-2531CZ

AFBR-25x1CZ
DC…5 Megabaud Versatile Link Fiber Optic Receiver
for 1mm POF and 200µm PCS
Data Sheet
Description
The AFBR-25x1CZ receiver consists of an IC with an inte-
grated photodiode providing a TTL logic families compat-
ible output. In combination with the Avago AFBR-15x9Z
or AFBR-16x9Z transmitter any type of signal from DC up
to 5MBd at distances up to 50 meters with 1mm 0.5NA
POF and 500 meters with 200µm 0.37NA PCS is supported.
The receiver is a 4-pin device, packed in Versatile Link
housing. Versatile Link components can be interlocked
(N-plexed together) to minimize space and to provide dual
connections with the duplex connectors. Various simplex
and duplex connectors, as well as POF cables are available
for Versatile Link components. Please contact Avago Tech-
nologies for details or visit our company website at www.
avagotech.com
AFBR-25x1CZ devices have inverted output signals means
that light_on will lead to Data_out low.
Available options
Horizontal Package AFBR-2521CZ
Vertical Package AFBR-2531CZ
Tilted (30°) Package AFBR-2541CZ
Features
RoHS-compliant
Data transmission at signal rates from DC up to 5MBd
Receiver: integrated PIN diode and digitalizing IC with
TTL output logic
Power-on reset (POR)
Up to 50 meter distance with 1mm Plastic Optical Fiber
(POF); up to 500 meter distance with 200µm Polymer
Cladding Silica (PCS) Fiber
Operating temperature range of -40 °C to +85 °C
Compatible with Avagos Versatile Link family of
connectors, for easy termination of ber
Applications
Optical Receiver for 5MBd systems and below
Industrial control and factory automation
Extension of RS-232 and RS-485
High voltage insulation
Elimination of ground loops
Reduces voltage transient susceptibility
Drivers and Inverters
2
Application Literature
Application Note 1035 (Versatile Link) - AV02-0730EN
Package and Handling Information
The compact Versatile Link package is made of a ame
retardant material and uses the same pad layout as a
standard, eight-pin dual-in-line package. Horizontal,
Vertical, and Tilted (30°) packages are available. These
low prole Versatile Link packages are stackable and are
enclosed to provide a dust-resistant seal. Snap action
simplex, simplex latching, duplex, and duplex latching
connectors are oered with simplex or duplex cables.
Package Housing Color
Versatile Link components and simplex connectors are
color coded to eliminate confusion when making connec-
tions. Receiver packages are black and transmitters are in
grey color respectively.
Package Orientation
Performance and pinouts for the horizontal, vertical, and
tilted (30°) packages are identical. To provide additional
attachment support for the vertical Versatile Link housing
the designer has the option of using a self-tapping screw
through a printed circuit board into a mounting hole at
the bottom of the package. For most applications this is
not necessary.
Handling
Versatile Link components are auto-insertable. When
wave soldering is performed with Versatile Link compo-
nents, the optical port plug should be left in to prevent
contamination of the port. Do not use reow solder
processes (i.e., infrared reow or vapor-phase reow).
Non-halogenated water soluble uxes (i.e., 0% chloride),
not rosin based uxes, are recommended for use with
Versatile Link components.
Versatile Link components are moisture sensitive devices
and are shipped in a moisture sealed bag. If the compo-
nents are exposed to air for an extended period of time,
they may require a baking step before the soldering
process. Refer to the special labeling on the shipping tube
for details.
Recommended chemicals for Cleaning/Degreasing
Alcohols: methyl, isopropyl, isobutyl. Aliphatics: hexane,
heptanes. Other: soap solution, naphtha.
Do not use partially halogenated hydrocarbons such
as 1,1.1 trichloroethane, ketones such as MEK, acetone,
chloroform, ethyl acetate, methylene dichloride, phenol,
methylene chloride, or N-methylpyrolldone. Also, Avago
does not recommend the use of cleaners that use
halogenated hydrocarbons because of their potential en-
vironmental harm.
3
Interlocked (Stacked) Assemblies (refer to Figure 1)
Horizontal packages may be stacked by placing units with pins facing upward. Initially engage the inter -
locking mechanism by sliding the L bracket body from above into the L slot body of the lower package. Use
a straight edge, such as a ruler, to bring all stacked units into uniform alignment. This tech nique prevents
potential harm that could occur to ngers and hands of assemblers from the package pins. Stacked horizontal
packages can be disengaged if necessary. Repeated stacking and unstack ing causes no damage to individual units.
To stack vertical packages, hold one unit in each hand, with the pins facing away and the optical ports on the bottom.
Slide the L bracket unit into the L slot unit. The straight edge used for horizontal package alignment is not needed.
Stacking Horizontal Modules Stacking Vertical Modules
Figure 1c. Interlocked (stacked) Tilted (30°) packages
Tilted (30°) Module
Figure 1a. Interlocked (stacked) Horizontal packages Figure 1b. Interlocked (stacked) Vertical packages

AFBR-2531CZ

Mfr. #:
Manufacturer:
Broadcom / Avago
Description:
Fiber Optic Transmitters, Receivers, Transceivers VERTICAL 5MBAUD Rx 3.3V + 5V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet