OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

G-NICO-001

P1-P3P4-P6P7-P8
SENSOR SOLUTIONS ///Ni1000SOT
Page 1
09/2015
Ni1000SOT
Temperature Sensor
SPECIFICATIONS
Contact temperature sensing
Comply with former DIN 43760 standard
Small SMD package SOT 23
Automotive qualified
Ni1000SOT is a nickel thin film resistance temperature detector
(RTD) that is suitable for use in contact temperature sensing.
The devices are manufactured by PVD-deposition on a silicon
substrate. The thin film structure is covered by a passivation
layer for environmental protection and enhanced stability. The
nickel elements are mounted on lead frames and encapsulated
in SOT23 packages. This technology allows the production of
miniature, low cost, high precision temperature sensors.
The characteristics of the temperature sensor comply with the
former DIN 43760 standard. It is qualified for the most
demanding automotive applications (incl. exposure to hot oil)
and is suitable for many more applications in harsh
environments
Ni1000SOT
Temperature Sensor
SENSOR SOLUTIONS ///Ni1000SOT
10/2015
Page 2
FEATURES
Resistance: 1000 ohms at 0°C
Min/ Max temp -55°C to +160°C
Good linearity between resistance and
temperature (R V’s T)
Large temperature coefficient of resistance:
6178 ppm/K (0°C, 100°C)
Low power consumption
Good thermal contact via Pin 3
Tape and reel (8mm format)
APPLICATIONS
Temperature sensing, control and compensation
PERFORMANCE SPECS
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Basic resistance
R
0
0°C
997,81
1000
1002,20
Ω
Temperature coefficient of
resistance (according to
DIN 43760, see below)
TCR
0°C to +100°C
6100
6178
6240
ppm/K
Measurement current
I
0.2
5
mA
Self heating coefficient
EK
+23 °C, still air
1.4
1.7
2
mW/K
Operation temperature
T
Op
-55
+160
°C
Maximum resistance drift
R
1000h@150°C
0.1
%
Storage temperature
T
St
-55
+160
°C
ESD resistant
MIL 883E3015.7
Class 1
SELF HEATING EFFECT
For accurate temperature measurement it is recommended to choose a small current to avoid self heating of the
nickel sensing element. The temperature error caused by excessive measurement current can be calculated
using: T = P/EK
where P = I
2
∙R is the power generated by the measurement current and EK is the self heating coefficient.
PACKAGE INFORMATION
Parameter
Condition
Typ.
Unit
Package
SOT23
Soldering
Reflow to + 260°C
96Sn4Ag
Packing units
13” (330 mm) / 10000
Reel Size / # of sensors
Package marking
Three Digit code: “1” + “XX”, where “XX” is the
revision.
Ni1000SOT
Temperature Sensor
SENSOR SOLUTIONS ///Ni1000SOT
10/2015
Page 3
TYPICAL PERFORMANCE CURVES
Resistance characteristics
Tolerance chart
0
500
1000
1500
2000
2500
-60 -40 -20 0 20 40 60 80 100 120 140 160
Temperature / °C
Resistance / Ohm
Ni1000SOT
Linear trend curve
-2
-1,5
-1
-0,5
0
0,5
1
1,5
2
-60 -40 -20 0 20 40 60 80 100 120 140 160 180
Temperature / °C
Temperature tolerance / K
-15
-10
-5
0
5
10
15
Resistance tolerance / Ohm
P1-P3P4-P6P7-P8

G-NICO-001

Mfr. #:
Buy G-NICO-001
Manufacturer:
TE Connectivity / Measurement Specialties
Description:
Board Mount Temperature Sensors TEMP SENSOR RTD 1K¦ SOT23
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet