OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMC341LC3BTR

P1-P3P4-P6
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LOW NOISE AMPLIFIERS - SMT
4
HMC341LC3B
v03.0514
SMT GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 21 - 29 GHz
Outline Drawing
Absolute Maximum Ratings
Drain Bias Voltage (Vdd) +5.5 Vdc
RF Input Power (RFIN)(Vdd = +3.0 Vdc) +5 dBm
Channel Temperature 175 °C
Continuous Pdiss (T= 85 °C)
(derate 5.43 mW/°C above 85 °C)
0.489 W
Thermal Resistance
(channel to ground paddle)
184 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
Vdd (Vdc) Idd (mA)
+2.7 34
+3.0 35
+4.0 38
+5.0 41
Note: Amplier will operate over full voltage ranges shown above.
Typical Supply Current vs. Vdd
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[2]
HMC341LC3B Alumina, White Gold over Nickel
MSL3
[1]
H341
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LOW NOISE AMPLIFIERS - SMT
5
HMC341LC3B
v03.0514
SMT GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 21 - 29 GHz
Pin Number Function Description Interface Schematic
1 Vdd
Power Supply Voltage for the amplier. External bypass
capacitors of 100 pF, 1000pF, and 2.2 µF are required.
2, 3, 7-9 N/C
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
4, 6, 10, 12 GND
Package bottom has an exposed metal paddle that
must also be connected to RF/DC ground.
5 RFIN
This pin is AC coupled and matched
to 50 Ohms from 21 - 29 GHz.
11 RFOUT
This pin is AC coupled and matched
to 50 Ohms from 21 - 29 GHz.
Pin Descriptions
Application Circuit
Component Value
C1 100 pF
C2 1,000 pF
C3 2.2 µF
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LOW NOISE AMPLIFIERS - SMT
6
HMC341LC3B
v03.0514
SMT GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 21 - 29 GHz
Evaluation PCB
Item Description
J1, J2 SRI K-connector
J3, J4 DC Pin
C1 100 pF capacitor, 0402 Pkg..
C2 1,000 pF Capacitor, 0603 Pkg..
C3 2.2µF Capacitor, Tantalum
U1 HMC341LC3B Amplier
PCB
[2]
112647 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350.
List of Materials for Evaluation PCB 112646
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6

HMC341LC3BTR

Mfr. #:
Buy HMC341LC3BTR
Manufacturer:
Analog Devices Inc.
Description:
RF Amplifier lo Noise amp SMT, 21 - 29 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet