Philips Semiconductors Preliminary Product Specification Rev. 1.0 August 2001
I•CODE
PEGODA Smart Label Read/Write Device SL EV400
10
4 ELECTROMAGNETIC COMPATIBILITY
The SL EV400 fulfils the following requirements of electromagnetic compatibility:
FCC, Part 15 and CE.
4.1 FCC Class A Declaration of Conformity
This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio or
television reception. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio and television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Caution!
The Federal Communications Commission warns the users that changes or modifications to the unit not
expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
Accessories: This equipment has been tested and found to comply with the limits of a Class A digital device.
The accessories associated with this equipment are as follows:
• Shielded video cable
These accessories are required to be used in order to ensure compliance with FCC rules.
4.2 FCC Declaration of Conformity of a Class A Digital Device
We,
Philips Semiconductors Gratkorn GmbH
Mikronweg 1
8010 Gratkorn, Austria
declare that the product
SL EV 400,
FCC ID OWR40089
is in conformity with Part 15 of the FCC Rules.
Philips Semiconductors Preliminary Product Specification Rev. 1.0 August 2001
I•CODE
PEGODA Smart Label Read/Write Device SL EV400
11
Operation of this product is subject to the following conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
4.3 CE Declaration of Conformity
This Information Technology Equipment has been tested and found to comply with the following European
directives:
Harmonised Standards applied Description
EN 300 330: (2001-06) Air interface of the radio systems pursuant to § 3(2) (Article 3(2))
EN 60950:1992 Health and safety requirements pursuant to § 3 (1) 1. (Article 3(1) a)
EN 301 489-9 :(2000-09)
Protection requirements concerning electromagnetic compatibility §
3(1)2,(Article 3(1)(b))
Manufacturer's Name: Philips Semiconductors Gratkorn GmbH
Manufacturer's Address: Mikronweg 1, A-8101 Gratkorn, Austria
Type of Equipment: Smart label read/write device
Model No.: SL EV400
Philips Semiconductors hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s), and said equipment is in conformity with the relevant harmonised standards as
mentioned above.
Philips Semiconductors Preliminary Product Specification Rev. 1.0 August 2001
I•CODE
PEGODA Smart Label Read/Write Device SL EV400
12
4.4 Mechanical Specification
4.4.1 SIDE VIEW
Figure 3. Side View
114 mm.
41 mm.
22 mm.
80 mm.

SLEV400/HAB,122

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
KIT EVAL I.CODE RFID 13.56MHZ
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet