Table 13: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
160 CFA power mode 1
15 F 0b Word 160 supported
14 F 0b Reserved
13 F 0b CFA power mode 1 is required for one or more commands
implemented by the device
12 V 0b CFA power mode 1 disabled
11–0 F 000000000000b Maximum current in ma
161 X 0000h 0000h
0000h 0000h
0000h 0000h
0000h
Reserved for assignment by the CompactFlash Association
168 15–4 F 000h Reserved
3-0 V varies Device Nominal Form Factor
169 DATA SET MANAGEMENT command support
15–1 F 000000000000000
b
Reserved
0 F 1b 1 = The Trim bit in the DATA SET MANAGEMENT command
is supported
170 F 0000h 0000h
0000h 0000h
Additional product identifier
174 F 0000h 0000h Reserved
176 (O)V Varies Current media serial number (60 ASCII characters)
206 SCT Command Transport
15–12 X 0000b Vendor-specific
11–6 F 000000b Reserved
5 F 1b SCT Command Transport Data Tables supported
4 F 1b SCT Command Transport Features Control supported
3 F 0b SCT Command Transport Error Recovery Control supported
2 F 1b SCT Command Transport Write Same supported
1 X 0b Obsolete
0 F 1b SCT Command Transport supported
207 ( )F 0000h 0000h Reserved for CE-ATA
209 (O) Alignment of logical blocks within a larger physical block
15 F 0b Shall be cleared to zero
14 F 1b Shall be set to one
13–0 F 00000000000000b Logical sector offset within the first physical sector where
the first logical sector is placed
210 (O)V 0000h 0000h Write-Read-Verify Sector Count Mode 3 Only
212 (O)F 0000h 0001h Verify Sector Count Mode 2 Only
M500IT mSATA NAND Flash SSD
Device ID
09005aef865b1bc7
m500it_mSATA_industrial_ssd.pdf - Rev. E 6/16 EN
29
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.