OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HCPL-2502#500

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16
7
Insulation and Safety Related Specications
Parameter Symbol
8-Pin DIP
(300 Mil)
Value
SO-8
Value
Widebody
(400 Mil)
Value Units Conditions
Minimum External
Air Gap (External
Clearance)
L(101) 7.1 4.9 9.6 mm Measured from input terminals to
output terminals, shortest distance
through air.
Minimum External
Tracking (External
Creepage)
L(102) 7.4 4.8 10.0 mm Measured from input terminals to out-
put terminals, shortest distance path
along body.
Minimum Internal
Plastic Gap
(Internal Clearance)
0.08 0.08 1.0 mm Through insulation distance, conductor
to conductor, usually the direct distance
between the photoemitter and photo-
detector inside the optocoupler cavity.
Minimum Internal
Tracking (Internal
Creepage)
NA NA 4.0 mm Measured from input terminals to out-
put terminals, along internal cavity.
Tracking Resistance
(Comparative
Tracking Index)
CTI 200 200 200 Volts DIN IEC 112/VDE 0303 Part 1
Isolation Group IIIa IIIa IIIa Material Group
(DIN VDE 0110, 1/89, Table 1)
Option 300 - surface mount classication is Class A in accordance with CECC 00802.
8
IEC/EN/DIN EN 60747-5-5 Insulation Characteristics (OPTION 060 ONLY)*
Description Symbol 8 Pin DIP SO-8 Unit
Installation classication per DIN VDE 0110, Table 1
for rated mains voltage ≤ 150 V
rms
for rated mains voltage ≤ 300 V
rms
for rated mains voltage ≤ 600 V
rms
I – IV
I – IV
I – IV
I – IV
I – IV
I – III
Climatic Classication 0/70/21 0/70/21
Pollution Degree (DIN VDE 0110/39) 2 2
Maximum Working Insulation Voltage V
IORM
630 567 V
peak
Input to Output Test Voltage, Method b*
V
IORM
× 1.875 = V
PR
, 100% Production Test with t
m
=1 sec, Partial discharge < 5 pC
V
PR
1181 1063 V
peak
Input to Output Test Voltage, Method a*
V
IORM
× 1.6 = V
PR
, Type and Sample Test, t
m
=10 sec, Partial discharge < 5 pC
V
PR
1008 907 V
peak
Highest Allowable Overvoltage* (Transient Overvoltage t
ini
= 60 sec) V
IOTM
8000 6000 V
peak
Safety-limiting values – maximum values allowed in the event of a failure
Case Temperature
Input Current
Output Power
T
S
I
S, INPUT
P
S, OUTPUT
175
230
600
150
150
600
°C
mA
mW
Insulation Resistance at T
S
, V
IO
= 500 V R
S
≥ 10
9
≥ 10
9
Ω
* Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section IEC/EN/DIN EN 60747-5-5, for a
detailed description.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits in application.
IEC/EN/DIN EN 60747-5-5 Insulation Characteristics (HCNW135/6 OPTION 060 ONLY)*
Description Symbol Characteristic Unit
Installation classication per DIN VDE 0110, Table 1
for rated mains voltage ≤ 150 V
rms
for rated mains voltage ≤ 300 V
rms
for rated mains voltage ≤ 600 V
rms
for rated mains voltage ≤ 1000 V
rms
I – IV
I – IV
I – IV
I – III
Climatic Classication 0/70/21
Pollution Degree (DIN VDE 0110/39) 2
Maximum Working Insulation Voltage V
IORM
1414 V
peak
Input to Output Test Voltage, Method b*
V
IORM
× 1.875 = V
PR
, 100% Production Test with t
m
=1 sec, Partial discharge < 5 pC
V
PR
2651 V
peak
Input to Output Test Voltage, Method a*
V
IORM
× 1.6 = V
PR
, Type and Sample Test, t
m
=10 sec, Partial discharge < 5 pC
V
PR
2262 V
peak
Highest Allowable Overvoltage* (Transient Overvoltage t
ini
= 60 sec) V
IOTM
8000 V
peak
Safety-limiting values – maximum values allowed in the event of a failure
Case Temperature
Input Current
Output Power
T
S
I
S, INPUT
P
S, OUTPUT
150
400
700
°C
mA
mW
Insulation Resistance at T
S
, V
IO
= 500 V R
S
≥ 10
9
Ω
* Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section IEC/EN/DIN EN 60747-5-5, for a
detailed description.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits in application.
9
Absolute Maximum Ratings
Parameter Symbol Device Min. Max. Units Note
Storage Temperature* T
S
-55 125 °C
Operating Temperature* T
A
8-Pin DIP SO-8 -55 100 °C
Widebody -55 85
Average Forward Input Current* I
F(AVG)
25 mA 1
Peak Forward Input Current*
(50% duty cycle, 1 ms pulse width)
(50% duty cycle, 1 ms pulse width)
I
F(PEAK)
8-Pin DIP SO-8 50 mA 2
Widebody 40
Peak Transient Input Current*
(≤1 µs pulse width, 300 pps)
I
F(TRANS)
8-Pin DIP SO-8 1 A
Widebody 0.1
Reverse LED Input Voltage* (Pin 3-2)
V
R
8-Pin DIP SO-8 5 V
Widebody 3
Input Power Dissipation*
P
IN
8-Pin DIP SO-8 45 mW 3
Widebody 40
Average Output Current* (Pin 6) I
O(AVG)
8 mA
Peak Output Current* I
O(PEAK)
16 mA
Emitter-Base Reverse Voltage* (Pin 5-7) V
EBR
5 V
Supply Voltage (Pin 8-5) V
CC
-0.5 30 V
Output Voltage (Pin 6-5) V
O
-0.5 20 V
Supply Voltage* (Pin 8-5) V
CC
-0.5 15 V
Output Voltage* (Pin 6-5) V
O
-0.5 15 V
Base Current* (Pin 7) I
B
5 mA
Output Power Dissipation* P
O
100 mW 4
Lead Solder Temperature*
(Through-Hole Parts Only)
1.6 mm below seating plane, 10 seconds
up to seating plane, 10 seconds
T
LS
8-Pin DIP 260 °C
Widebody 260 °C
Reow Temperature Prole T
RP
SO-8 and
Option 300
See Package Outline Drawings section
*Data has been registered with JEDEC for the 6N135/6N136.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16

HCPL-2502#500

Mfr. #:
Buy HCPL-2502#500
Manufacturer:
Broadcom / Avago
Description:
High Speed Optocouplers 1MBd 1Ch 25mA
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet