OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

173D565X9015V

P1-P3P4-P6P7-P9P10-P10
173D
www.vishay.com
Vishay Sprague
Revision: 28-Jun-16
7
Document Number: 40019
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 V
DC
AT +85 °C, SURGE = 46 V; 23 V
DC
AT +125 °C, SURGE = 28 V
0.10 U 173D104(1)035U(2)(3) 0.5 3
0.12 U 173D124(1)035U(2)(3) 0.5 3
0.15 U 173D154(1)035U(2)(3) 0.5 3
0.18 U 173D184(1)035U(2)(3) 0.5 3
0.22 U 173D224(1)035U(2)(3) 0.5 3
0.27 U 173D274(1)035U(2)(3) 0.5 3
0.33 U 173D334(1)035U(2)(3) 0.5 3
0.39 U 173D394(1)035U(2)(3) 0.5 3
0.47 U 173D474(1)035U(2)(3) 0.5 3
0.56 V 173D564(1)035V(2)(3) 0.5 3
0.68 V 173D684(1)035V(2)(3) 0.5 3
0.82 V 173D824(1)035V(2)(3) 0.5 3
1.0 V 173D105(1)035V(2)(3) 0.5 3
1.2 V 173D125(1)035V(2)(3) 0.5 3
1.5 V 173D155(1)035V(2)(3) 0.5 3
1.8 W 173D185(1)035W(2)(3) 0.5 3
2.2 W 173D225(1)035W(2)(3) 0.6 3
2.7 W 173D275(1)035W(2)(3) 0.8 3
3.3 W 173D335(1)035W(2)(3) 0.9 4
3.9 W 173D395(1)035W(2)(3) 1.1 4
4.7 W 173D475(1)035W(2)(3) 1.3 4
5.6 X 173D565(1)035X(2)(3) 1.6 4
6.8 X 173D685(1)035X(2)(3) 1.9 4
8.2 X 173D825(1)035X(2)(3) 2.3 4
10 X 173D106(1)035X(2)(3) 2.8 4
12 Y 173D126(1)035Y(2)(3) 3.3 4
15 Y 173D156(1)035Y(2)(3) 4.2 4
18 Y 173D186(1)035Y(2)(3) 5.0 6
22 Y 173D226(1)035Y(2)(3) 6.2 6
27 Y 173D276(1)035Y(2)(3) 7.5 6
33 Y 173D336(1)035Y(2)(3) 9.2 6
39 Y 173D396(1)035Y(2)(3) 10.0 6
47 Y 173D476(1)035Y(2)(3) 10.0 6
50 V
DC
AT +85 °C, SURGE = 65 V; 33 V
DC
AT +125 °C, SURGE = 40 V
0.10 U 173D104(1)050U(2)(3) 0.5 3
0.12 U 173D124(1)050U(2)(3) 0.5 3
0.15 U 173D154(1)050U(2)(3) 0.5 3
0.18 U 173D184(1)050U(2)(3) 0.5 3
0.22 U 173D224(1)050U(2)(3) 0.5 3
0.27 U 173D274(1)050U(2)(3) 0.5 3
0.33 V 173D334(1)050V(2)(3) 0.5 3
0.39 V 173D394(1)050V(2)(3) 0.5 3
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE PART NUMBER
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
120 Hz (%)
Note
• Part number definition:
(1) For 10 % tolerance specify “X9”; for 20 % specify “X0”; for 5 % specify “X5” (special order)
(2) Packaging code: for reel 13" specify W, leave blank for ammo pack
(3) Termination: for 100 % tin specify E3, for SnPb leave blank
173D
www.vishay.com
Vishay Sprague
Revision: 28-Jun-16
8
Document Number: 40019
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
50 V
DC
AT +85 °C, SURGE = 65 V; 33 V
DC
AT +125 °C, SURGE = 40 V
0.47 V 173D474(1)050V(2)(3) 0.5 3
0.56 V 173D564(1)050V(2)(3) 0.5 3
0.68 V 173D684(1)050V(2)(3) 0.5 3
0.82 V 173D824(1)050V(2)(3) 0.5 3
1.0 V 173D105(1)050V(2)(3) 0.5 3
1.2 W 173D125(1)050W(2)(3) 0.5 3
1.5 W 173D155(1)050W(2)(3) 0.6 3
1.8 W 173D185(1)050W(2)(3) 0.7 4
2.2 W 173D225(1)050W(2)(3) 0.9 4
2.7 X 173D275(1)050X(2)(3) 1.1 4
3.3 X 173D335(1)050X(2)(3) 1.3 4
3.9 X 173D395(1)050X(2)(3) 1.6 4
4.7 X 173D475(1)050X(2)(3) 1.9 4
5.6 Y 173D565(1)050Y(2)(3) 2.2 4
6.8 Y 173D685(1)050Y(2)(3) 2.7 4
8.2 Y 173D825(1)050Y(2)(3) 3.2 4
10 Y 173D106(1)050Y(2)(3) 4.0 6
12 Y 173D126(1)050Y(2)(3) 5.0 6
15 Y 173D156(1)050Y(2)(3) 6.0 6
18 Y 173D186(1)050Y(2)(3) 6.0 6
22 Y 173D226(1)050Y(2)(3) 11.0 6
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE PART NUMBER
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
120 Hz (%)
Note
• Part number definition:
(1) For 10 % tolerance specify “X9”; for 20 % specify “X0”; for 5 % specify “X5” (special order)
(2) Packaging code: for reel 13" specify W, leave blank for ammo pack
(3) Termination: for 100 % tin specify E3, for SnPb leave blank
TAPE AND REEL PACKAGING in inches [millimeters]
CASE CODE UNITS PER REEL
COMPONENT SPACING TAPE SPACING
UNITS PER AMMOPACK
AB
U 4500
0.200 ± 0.015
[5.08 ± 3.81]
2.062 ± 0.062
[52.37 ± 1.57]
1000
V 4000
W, X 2500
500
Y 500
0.400 ± 0.015
“A”
“A”
0.750 [19.05]
C
(1.b)
SECTION “A” - ”A”
0.250 [6.35] (3.b)
Component overall
length (1.b)
A
0.031 [0.79] (3.f)
(Both sides) (3.f)
(1.a)
0.047 [1.19] max.
off center (1.a)
0.125 [3.18] max.
B
Tape
spacing
Component
spacing (4.b)
13 [330.2] dia.
Standard reel
1.126 to 3.07
[28.6 to 78.0]
I. D. reel HUB
0.625 ± 0.062
[15.88 ± 1.57]
dia. thru hole
Label (4.a)
1.374 to 3.626
[34.9 to 92.1]
173D
www.vishay.com
Vishay Sprague
Revision: 28-Jun-16
9
Document Number: 40019
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD REEL PACKAGING INFORMATION
1. Component Leads
a. Component leads shall not be bent beyond 0.047"
[1.19 mm] maximum from their nominal position when
measured from the leading edge of the component lead
at the inside tape edge and at the lead egress from the
component.
b. The “C” dimension shall be governed by the overall
length of the reel packaged component. The distance
between flanges shall be 0.125" to 0.250" [3.18 mm to
6.35 mm] greater than the overall component length.
2. Orientation
All polarized components must be oriented to one direction.
The cathode lead tape shall be a color and the anode lead
tape shall be white.
3. Reeling
a. Components on any reel shall not represent more than
two date codes when date code identification is required.
b. Component leads shall be positioned between pairs of
0.250" [6.35 mm] tape.
c. The disposable reels have hubs and corrugated
fibreboard flanges and core.
d. A minimum of 12" [304.8 mm] leader of tape shall be
provided before the first and after the last component on
the reel.
e. 50 lb to 60 lb. Kraft paper must be wound between layers
of components as far as necessary for component
protection. Width of paper to be 0.062" to 0.250"
[1.57 mm to 6.35 mm] less than the “C” dimension
of the reel.
f. Row components must be centered between tapes
± 0.047" [1.19 mm]. In addition, individual components
may deviate from center of component row ± 0.031"
[0.79 mm].
g. Staples shall not be used for splicing. Not more than
4 layers of tape shall be used in any splice area and no
tape shall be offset from another by more than 0.031"
[0.79 mm] non-cumulative. Tape splices shall overlap
at least 6.0" [152.4 mm] for butt joints and at least
3" [76.2 mm] for lap joints and shall not be weaker than
unspliced tape. Universal splicing clips may also be used.
h. Quantity per reel shall be controlled so that tape
components and cover shall not extend beyond the
smallest dimension of the flange (either across flats or
diameter). Once the quantity per reel for each part
number has been established, future orders for that part
number shall be packaged in that quantity. When order
release quantity is less than the established quantity, a
standard commercial pack is to be used.
i. A maximum of 0.25 % of the components per reel
quantity may be missing without consecutive missing
components.
j. Adequate protection must be provided to prevent
physical damage to both reel and components during
shipment and storage
PRODUCT INFORMATION
Mounting of Through Hole Components www.vishay.com/doc?40108
SELECTOR GUIDES
Quick Reference Guide www.vishay.com/doc?40037
Selector Guide www.vishay.com/doc?49054
Parameter Comparison Guide www.vishay.com/doc?40033
FAQ
Frequently Asked Questions www.vishay.com/doc?40110
P1-P3P4-P6P7-P9P10-P10

173D565X9015V

Mfr. #:
Buy 173D565X9015V
Manufacturer:
Vishay
Description:
Tantalum Capacitors - Solid Leaded 5.6uF 15volts 10% V case Axial
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet